Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Børsteløs combo / Traxxas børsteløs combo / "BULK" Traxxas 3350R Velineon VXL-3s Brushless Power System
-17%

"BULK" Traxxas 3350R Velineon VXL-3s Brushless Power System

Art.nr: BULK TRX 3350R

1.995,-

2.395,-

- 17%

"Bulk" Traxxas
Kontakt oss for mer informasjon om dette produktet

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***


Waterproof Velineon VXL-3s Brushless Power System (includes VXL-3s ESC og Velineon 3500 motor)
Børsteløst powersett til elektrobiler, på 3 celler yter denne motoren veldig mye og kan fint brukes alene som motor i E-Maxx, E-Revo eller lignende biler. Som motorsett i 1:10 får dette powersettet lett bilen opp i 100km/h. 4mm aksel.

  • This is the Traxxas Velineon Extreme Brushless Power System for electric powered R/C vehicles.
  • FEATURES: Each component engineered to work wih each other to eliminate restrictions and allow maximum power flow

    Velineon VXL3s ESC; vAuto-detects and compatible with brushed, brushless and sensored brushless motors
  • Compatible with NiCd, NiMH (4-9 cells) and 2-3 cell LiPo battery
  • packs-two stage low voltage detection for LiPos
  • Three driver profiles-Sport, Race and Training Modes
  • Gold-plated motor connectors
  • Velineon 3500 Brushless Motor;
  • 10-turn 3500kV
  • Optimized for extreme power and efficiency in 1/10 scale vehicles
  • Ultra high temp neodymium magnets, high-speed ball bearings
  • Precision balanced rotor
  • Traxxas High-Current Connector
  • Reverse polarity protection makes backward connections impossible
  • Compatible with high-current 12-gauge wire
  • Gold-plated wide surface terminals
  • Textured surface for easy gripping
  • INCLUDES: Velineon VXL3s ESC, Velineon 3500 Brushless Motor and high-current connector
  • REQUIRES: Installing in vehicle
  • NiCad, NiMH (4-10 cells) or 2-3 cell LiPo battery

    SPECS: VXL-3s
  • Input voltage: 4.8-11.1V (4-9 cells NiMH or 2S-3S LiPo)
  • Supported motors: Brushed/Brushless/Sensorless brushless
  • Motor Limit: None
  • Continuous current: 200A
  • Peak current: 320A
  • BEC voltage 6.0V DC
  • Transistor type: MOSFET
  • On-resisteance: 0.00075 ohms Max (0.006/8 FETs)
  • PWM frequency: 12,000Hz
  • Battery connectors: Traxxas High-Current Connector
  • Motor connectors: TRX 3.5mm bullet connectors
  • Motor/battery wiring: 12-gauge Maxx Cable
  • Thermal protection: 2-ge thermal shutdown
  • Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm)
  • Weight: 3.17oz (90g)
  • Velineon 3500
  • Type: Sensorless brushless
  • RPM/volt: 3500 (10-turn)
  • Magnet type: Ultra High-Temperature, sintered neodymium
  • Connection type: TRX 3.5mm bullet connectors
  • Wire Size: 12-gauge Maxx Cable w/ solder tabs
  • Current Ratings: 65A constant; 100A peak/burst
  • Max RPM: 50,000
  • Diameter: 1.42" (36mm) (540 size)
  • Length: 2.165"(55mm)
  • Weight: 9.24oz (262g)

Produsent

"Bulk" Traxxas

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***

Relaterte produkter

 

Hovedbilde Traxxas 3355R VXL-3s Waterproof Brushless ESC Hovedbilde Traxxas 3355R VXL-3s Waterproof Brushless ESC
Traxxas 3355R VXL-3s Waterproof Brushless ESC
Art.nr: TRX 3355R
Copied
  This is the Traxxas VXL-3s Waterproof Brushless Electronic Speed Control. FEATURES Auto detects brushed, brushless or sensored brushless motor types Compatible with 4-cell NiCd or NiMH batteries up to 3S LiPo packs (11.1V) EZ-Set(R) one-touch push-button set-up Three drive profiles Sport, Race and Training mode Training mode limits full throttle to 50% for beginning drivers Locked rotor protection if vehicle is stuck or motor is bound Battery over-voltage protection triggers failsafe if maximum input voltage is exceeded Sensor phase detection protects against improperly wiring aftermarket sensored motors Sensored motor backup protection switches to sensorless operation if motor sensor fails Auxiliary fan output (fan not included) INCLUDES Traxxas VXL-3s Electronic Speed Control with 12 gauge motor and battery cables, three preinstalled 3.5mm female bullet motor connectors, Traxxas High-Current male battery connector, universal receiver connector and instruction manual REQUIREMENTS Installing in vehicle and connecting to battery, receiver and motor SPECIFICATIONS Input Voltage 4.8 - 11.1V (4-9 NiMH, 2S-3S LiPo) Motor Compatibility: Sensorless Brushless Motor Limit: None Battery Connector: Trasxxas High-Current Motor Connectors: TRX 3.5 Bullet Connectors Motor and Battery Wires: 12 gauge Maxx ccable Continuous Current: 200A Peak Current: 320A forward and reverse BEC Current: 6.0V DC Transistor Type: MOSFET On-Resistance: 0.00075 ohms PWM Frequency: 12,000Hz Thermal Protection: Two-Stage Thermal Shutdown Weight: 3.88 oz (110g) Length: 2.29" (58.17mm) Width: 1.54" (39mm) Height: 1.2" (30.48mm) including heatsink

1.445,-

1.495,-

KJØP
-3%
Hovedbilde Hovedbilde
"BULK" Traxxas 3355R VXL-3s Waterproof Brushless ESC
Art.nr: BULK TRX 3355R
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***   The Velineon® VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles. It sets up, operates, and programs just like the Traxxas XL-5™ family of ESCs so there's no tricky new procedures to learn. Traxxas' exclusive patented Training Mode™ is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3s is equipped with two-stage low voltage detection to allow LiPo battery use, including powerful 11.1-volt 3S packs! The VXL-3s is manufactured by Traxxas to ensure the highest level of quality and support. Traxxas Velineon® VXL-3s ESC   Traxxas High-Current Connector The VXL-3s ESC is equipped with the patented Traxxas high-current connectors for restriction-free current flow. Velineon VXL-3s Waterproof Features: Patented Traxxas High-Current Connector eliminates a common bottleneck and maintains pure, unrestricted power flow from the battery to the brushless power system. Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold. Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt) The patented Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3s by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action.  The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures. The VXL-3s is programmable with three drive profiles: Sport Mode – Fwd / Brake / Rev Race Mode – Fwd / Brake Training Mode**™ – 50% Fwd / Brake / 50% Rev Multi-color LED provides clear feedback Two-stage thermal shutdown protection protects the VXL-3s from overheating. Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound. Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded. Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture. Micro-fin aluminum heatsink dissipates heat. The built-in auxiliary fan output powers a snap-on accessory fan for increased cooling capacity during extreme use. A handy clasp on the speed control case keeps the wire neatly in place until you are ready to use it. MOSFET design provides high-current output (320 amp peak) with incredibly low resistance (.00075 Ohm). Gold plated 3.5 mm bullet connectors on 12-gauge Maxx® Cable flow full power to the motor without performance strangling resistance.                 VXL-3s WATERPROOF ESC SPECIFICATIONS Input Voltage: NiCad/NiMH 4-9 Cells (4.8 to 10.8 Volts DC); LiPo 2-3 Cells (7.4 to 11.1 Volts DC) Case Size: W39 x D55 x H33 mm Weight: 90 gr Motor Limit (Brushless): No motor limit On Resistance Forward: 0.00075 Ohms On Resistance Reverse: 0.00075 Ohms Peak Current - Forward: 320A Peak Current - Reverse: 320A Braking Current: 320A Continuous Current: 200A BEC Voltage: 6.0 V BEC Current: 2.5A (with 6-cell NiMH) Power Wire: 12-Gauge Maxx® Cable Input Harness Wire: 26 Gauge / 100 mm Transistor Type: MOSFET Low Voltage Detection: 2-Stage indicators, switchable (on or off) Thermal Protection: 2-Stage thermal shutdown Single-Button Setup: Yes, Traxxas EZ-Set® Battery Input Connector: Traxxas High-Current Connector Motor Types: Brushless Ports: RX Input, auxiliary fan Profile selection: Sport Mode: 100% FWD, 100% BRAKES, 100% REV Race Mode: 100% FWD, 100% BRAKES, NO REV Training Mode:** 50% FWD, 100% BRAKES, 50% REV *Properly geared **Patented

1.195,-

1.495,-

KJØP
-20%
Hovedbilde Traxxas 3351R Velineon 3500 Brushless Motor Hovedbilde Traxxas 3351R Velineon 3500 Brushless Motor
Traxxas 3351R Velineon 3500 Brushless Motor
Art.nr: TRX 3351R
Copied
This is the Velineon 3500 Brushless Motor from Traxxas. FEATURES: Massive torque and linear power           Optimized for 1/10th scale vehicles           Ultra high temp sintered neodymium motor magnets           12-gauge motor wire with gold-plated bullet connectors           Efficient, high-speed ball bearings           Consistent, high-power output           Precision-balanced rotor           Solder tabs with protective end caps           Fully rebuildable INCLUDES: One Velineon 3500 Extreme Brushless Motor REQUIRES: Installation on vehicle SPECS:    Type: Sensorless Brushless           RPM/volt: 3500 (10-turn)           Wire size: 12-gauge Maxx Cable           Max RMP: 50,000           Weight: 9.24 oz (262g)           Current Ratings: 65A constant / 100A peak/burst           Magnet type: Ultra High-Temp. Sintered Neodymium           Connection type: Solder tab / TRX 3.5mm Bullet

1.195,-

1.295,-

KJØP
-8%
Hovedbilde Hovedbilde
"BULK" Traxxas 3351R Velineon 3500 Brushless Motor
Art.nr: BULK TRX 3351R
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***   Bulk betyr at den kommer uten emballasje.   This is the Velineon 3500 Brushless Motor from Traxxas. FEATURES: Massive torque and linear power           Optimized for 1/10th scale vehicles           Ultra high temp sintered neodymium motor magnets           12-gauge motor wire with gold-plated bullet connectors           Efficient, high-speed ball bearings           Consistent, high-power output           Precision-balanced rotor           Solder tabs with protective end caps           Fully rebuildable INCLUDES: One Velineon 3500 Extreme Brushless Motor REQUIRES: Installation on vehicle SPECS:    Type: Sensorless Brushless           RPM/volt: 3500 (10-turn)           Wire size: 12-gauge Maxx Cable           Max RMP: 50,000           Weight: 9.24 oz (262g)           Current Ratings: 65A constant / 100A peak/burst           Magnet type: Ultra High-Temp. Sintered Neodymium           Connection type: Solder tab / TRX 3.5mm Bullet

995,-

1.295,-

Ikke på lager
-23%
Hovedbilde Traxxas 3350R Velineon VXL-3s Brushless Power System Hovedbilde Traxxas 3350R Velineon VXL-3s Brushless Power System
Traxxas 3350R Velineon VXL-3s Brushless Power System
Art.nr: TRX 3350R
Copied
Waterproof Velineon VXL-3s Brushless Power System (includes VXL-3s ESC, Velineon 3500 motor, and speed control mounting plate (part #3725)) Børsteløst powersett til elektrobiler, på 3 celler yter denne motoren veldig mye og kan fint brukes alene som motor i E-Maxx, E-Revo eller lignende biler. (dette er 1/8 biler) men man bør gire den til ca 55-60 km/t med 3 celler. Som motorsett i 1:10 får dette powersettet lett bilen opp i 100km/h. 3mm aksel. This is the Traxxas Velineon Extreme Brushless Power System for electric powered R/C vehicles. FEATURES: Each component engineered to work wih each other to eliminate restrictions and allow maximum power flow Velineon VXL3s ESC; vAuto-detects and compatible with brushed, brushless and sensored brushless motors Compatible with NiCd, NiMH (4-9 cells) and 2-3 cell LiPo battery packs-two stage low voltage detection for LiPos Three driver profiles-Sport, Race and Training Modes Gold-plated motor connectors Velineon 3500 Brushless Motor; 10-turn 3500kV Optimized for extreme power and efficiency in 1/10 scale vehicles Ultra high temp neodymium magnets, high-speed ball bearings Precision balanced rotor Traxxas High-Current Connector Reverse polarity protection makes backward connections impossible Compatible with high-current 12-gauge wire Gold-plated wide surface terminals Textured surface for easy gripping INCLUDES: Velineon VXL3s ESC, Velineon 3500 Brushless Motor and high-current connector REQUIRES: Installing in vehicle NiCad, NiMH (4-10 cells) or 2-3 cell LiPo battery SPECS: VXL-3s Input voltage: 4.8-11.1V (4-9 cells NiMH or 2S-3S LiPo) Supported motors: Brushed/Brushless/Sensorless brushless Motor Limit: None Continuous current: 200A Peak current: 320A BEC voltage 6.0V DC Transistor type: MOSFET On-resisteance: 0.00075 ohms Max (0.006/8 FETs) PWM frequency: 12,000Hz Battery connectors: Traxxas High-Current Connector Motor connectors: TRX 3.5mm bullet connectors Motor/battery wiring: 12-gauge Maxx Cable Thermal protection: 2-ge thermal shutdown Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm) Weight: 3.17oz (90g) Velineon 3500 Type: Sensorless brushless RPM/volt: 3500 (10-turn) Magnet type: Ultra High-Temperature, sintered neodymium Connection type: TRX 3.5mm bullet connectors Wire Size: 12-gauge Maxx Cable w/ solder tabs Current Ratings: 65A constant; 100A peak/burst Max RPM: 50,000 Diameter: 1.42" (36mm) (540 size) Length: 2.165"(55mm) Weight: 9.24oz (262g)

2.095,-

2.395,-

KJØP
-13%

Kunder kjøpte også

Hovedbilde Traxxas 9491 Gear Adapter Set Drag Slash
Traxxas 9491 Gear Adapter Set Drag Slash
Traxxas 9491 Gear Adapter Set Drag Slash

69,-

KJØP
Hovedbilde Traxxas 1926 Vinyl Caps/Antenna Spool
Traxxas 1926 Vinyl Caps/Antenna Spool
This is a set of TRAXXAS receiver tube caps and a spool that could be used for                          any receiver antenna tubes. FEATURES: Caps are yellow plastic.           Spool is plastic.(for wrapping excess rx wire before putting in tube) INCLUDES: Two caps           One spool                     

25,-

KJØP
Hovedbilde Traxxas 3159 Hex Screws 3x10mm (6)
Traxxas 3159 Hex Screws 3x10mm (6)
These are stock replacement screws for the Traxxas kit. FEATURES: Steel construction           Cap head with hexagon socket drive insert           Metal lock washers INCLUDES: (6) Screws           (6) Lock Washers           (1) Hex Wrench SPECS:    Screws: Diameter: 3mm                   Length: 10mm           Lock Washers: Inner Diameter: 3mm                         Outer Diameter:4mm

35,-

KJØP
Hovedbilde Traxxas 3743 Steering Bellcrank
Traxxas 3743 Steering Bellcrank
These are Steering Bellcranks and Draglinks for the                       Traxxas Rustler and Stampede. FEATURES: White Plastic Construction INCLUDES: One Bellcrank           One Link           One Arm REQUIRES: Rustler of Stampede COMMENTS: None  

49,-

KJØP
Hovedbilde Yeah Racing STEEL BEARING SET (18PCS) FOR TAMIYA M05 / ... Hovedbilde Yeah Racing STEEL BEARING SET (18PCS) FOR TAMIYA M05 / ...
Yeah Racing STEEL BEARING SET (18PCS) FOR TAMIYA M05 / ...
Yeah Racing RC Ball Bearing Set     Feature:   For : Tamiya M05 / M05 Ver. II Pro / M06 Material : Steel Shielding: Rubber   Specification:   YB6011B  5mm x 8mm x 2.5mm (6pcs) YB6014B  5mm x 11mm x 4mm (12pcs)    Include:   Total Bearing (18 Pcs) RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)   Specifications: Ball Bearing For Tamiya M05 Pro / M05 Ver.II Material: Metal   Includes: Bearing (18Pcs) Bearing Oil (15ml) #YA-0215   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

149,-

169,-

KJØP
-12%
Hovedbilde Tamiya 58706 1/10 RC Thunder Shot 2022 no esc Hovedbilde Tamiya 58706 1/10 RC Thunder Shot 2022 no esc
Tamiya 58706 1/10 RC Thunder Shot 2022 no esc
Tamiya 58706 1/10 RC Thunder Shot 2022 Following the Fire Dragon, Scorcher and Thunder Dragon, Tamiya welcomes Thunder Shot as a re-released and updated version! This R/C model features some inherited basic specifications from Item 58361 with different CVA oil dampers and the addition of an aluminum motor mount, for better motor performance, and structural rigidity! • This R/C model assembly kit is a re-released and updated version of Thunder Shot, the original of which was first released in 1987. Length: 390mm, width: 240mm, height: 135mm. • Polycarbonate body is pre-cut & pre-painted in white and blue, with transparent canopy. (Body requires application of stickers, assembly and painting of figure, and other work.) • ABS bathtub chassis. • 4-wheel independent double wishbone suspension with CVA oil dampers uses front stabilizer for a superior ride. Kit includes CVA oil dampers II instead of Type I seen in the original release. • The front and rear sealed gearboxes contain compact, durable die-cast 3-bevel differential gears for smooth performance. • Semi-pneumatic spike tires. • Contains separate rear wing (pre-painted in white). • Includes a driver figure. • Type 540 motor included. Requires: 2-channel radio steering servo and esc. 7.2volt battery with compatible charger. SPECIFICATIONS Adjustable Gear Ratio Fixed Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Electronic Speed Control (esc) Not Included Motor 540-brushed type Required To Complete 2-channel radio, steering servo,esc, 7.2volt battery & battery charger Scale 1/10 Shock Damper CVA Oil Filled Suspension Fully Independent Double Wishbone Terrain Use Off-Road

2.195,-

2.395,-

KJØP
-8%
Hovedbilde Hitec HS-311 Servo Standard U
Hitec HS-311 Servo Standard U
This is a Hitec servo that will work with all modern radio systems  including Futaba J, Hitec, JR and Airtronics Z.     FEATURES Heavy-duty resin gear train  Nylon bushing  3-pole ferrite motor   INCLUDES One Deluxe Standard servo with nylon bushing.  One white small X-shaped servo horn.  One white adjustable servo horn.  One white offset straight servo horn.  One red X-shaped heavy-duty servo horn.  Four brass eyelets.  One white plastic wheel servo horn.  Four black rubber vibration isolators.  Four M2x14 mounting screws   REQUIREMENTS Universal Futaba J, S/JR/Airtronics Z plug compatible radio system SPECIFICATIONS  Speed: 0.19 sec/60° at 4.8V  Speed: 0.15 sec/60° at 6.0V  Torque: 3.0 kg-cm at 4.8V  Torque: 3.7 kg-cm at 6.0V  Length: 1.60" (41mm)  Width: 0.80" (20mm)  Height: 1.40" (37mm)  Weight: 1.5oz (43g)   NOTE: This is a non-ball bearing servo.

209,-

219,-

KJØP
-5%
Hovedbilde Traxxas 7890 Bearing Set Complete X-Maxx, XRT
Traxxas 7890 Bearing Set Complete X-Maxx, XRT
Traxxas 7890 - X-Truck™ Bearing Kit Restore your X-Maxx® or XRT® to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Fits latest-generation X-Maxx. Earlier X-Maxx models may require upgraded parts. ­ X-TRUCK BEARING KIT FEATURES All-inclusive bearing kit Individual box compartments Handy label for identifying parts Fits X-Maxx® & XRT®

539,-

599,-

KJØP
-10%
Hovedbilde Traxxas 7889X Hardware Kit Complete Stainless Steel ...
Traxxas 7889X Hardware Kit Complete Stainless Steel ...
Traxxas 7889X - X-Maxx Stainless Hardware Kit Give your X-Maxx a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your X-Maxx with stainless steel hardware for long-lasting performance in wet conditions. Hex-drive heads deliver a positive and secure connection for easy installation and removal. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. ­ X-MAXX STAINLESS STEEL HARDWARE KIT FEATURES Stainless steel construction for long-lasting performance Tough hex-drive heads Individual box compartments Handy label for identifying hardware Fits X-Maxx®

769,-

799,-

KJØP
-4%
Hovedbilde Traxxas 6444 Spur Gear 54-Tooth Steel (Machined, ...
Traxxas 6444 Spur Gear 54-Tooth Steel (Machined, ...
Traxxas 6444 Spur gear, 54-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx® XO-1® XRT™

429,-

469,-

KJØP
-9%
Hovedbilde Hot Racing Steel Spur Gear 50t 1 Mod: X-Maxx Xo-1 Hovedbilde Hot Racing Steel Spur Gear 50t 1 Mod: X-Maxx Xo-1
Hot Racing Steel Spur Gear 50t 1 Mod: X-Maxx Xo-1
The Hot Racing hardened steel Mod 1 spur gear is an optional upgrade for the Traxxas E Revo 2.0, X-Maxx 6S and 8S, Maxx 4S and XO-1 models. Choose from 50, 52 and 54 tooth options.   NOTE: Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 Adjusting Gear Mesh) With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. Features:   Specifications: Overall diameter: 52.8mm Gear face width: 8mm  Includes: One (1) mod 1 steel spur gear CNC machined hardened steel construction Black oxide finished Laser etched tooth count marking Upgrade for factory plastic spur gear

599,-

639,-

KJØP
-6%
Hovedbilde Traxxas 7895 Suspension Kit WideMaxx Black X-Maxx Hovedbilde Traxxas 7895 Suspension Kit WideMaxx Black X-Maxx
Traxxas 7895 Suspension Kit WideMaxx Black X-Maxx
X-Maxx® WideMaxx® Kit     A Tougher, Wider Stance The Traxxas X-Maxx is a new breed of monster truck with a tough-as-nails attitude, brutal power, and unrivaled durability. The WideMaxx kit builds on the X-Maxx’s already legendary performance by widening the stance 60 mm for even greater cornering stability. Take your X-Maxx to the next level with the WideMaxx kit and get ready for the ultimate expression of Traxxas Tough™.   The X-Maxx WideMaxx kit includes extended versions of the extreme heavy-duty suspension arms for a 2.36” (60 mm) wider stance. Molded from our toughest composite material, the new arms offer just enough flex to resist breaking, even in cold weather. Five different color options allow maximum customization of your X-Maxx. New 1.346 rate shock springs replace the standard springs for optimal handing performance. Wider suspension links and steel driveshafts complete the package and X-Maxx's thoughtful engineering makes installation quick and easy.               ­ X-Maxx WideMaxx Quick Features ­ Available in five different color options Widens the X-Maxx by 2.36" (60 mm) for increased cornering stability Extended arms constructed from extreme-duty cold weather compound Kit Includes: Upper suspension arms (4) Lower suspension arms (4) Extended driveshafts (4) WideMaxx toe links (2) New springs (1.346 rate) ­ ­     MODEL 7895: WideMaxx® Kit

2.195,-

2.395,-

KJØP
-8%
Hovedbilde Traxxas 6491R Pinion Gear 18T 1.0M Pitch for 5mm Shaft ...
Traxxas 6491R Pinion Gear 18T 1.0M Pitch for 5mm Shaft ...
Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 7746X Steering Link & Servo Saver Spring HD ...
Traxxas 7746X Steering Link & Servo Saver Spring HD ...
Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)

99,-

KJØP
Hovedbilde Traxxas 6487R Gear, 15-T pinion (machined) (1.0 metric ...
Traxxas 6487R Gear, 15-T pinion (machined) (1.0 metric ...
Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 6511 Link Bluetooth Wireless Module TQi
Traxxas 6511 Link Bluetooth Wireless Module TQi
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP
-9%
Hovedbilde Traxxas 2422 Pinion Gear 22T 48P
Traxxas 2422 Pinion Gear 22T 48P
Gear, 22-T pinion (48-pitch) / with set screw

39,-

KJØP
Hovedbilde Traxxas 9380 LED Light Set Corvette Stingray Hovedbilde Traxxas 9380 LED Light Set Corvette Stingray
Traxxas 9380 LED Light Set Corvette Stingray
Traxxas 4-Tec 3-0 Corvette Stingray LED Light Kit Extreme Scale Details! The Traxxas 4-Tec 3.0 Corvette Stingray set the standard for replica scale detail in 1/10 RC models. With so much attention devoted to the Stingray’s beautiful clipless body, it’s only fitting to offer an LED light kit for even greater realism. The Corvette Stingray LED light kit fits into the body’s color-molded lenses for a perfect factory look and it’s fully waterproof for all-weather fun. Day or night, this LED kit completes the look of your Corvette Stingray with exacting scale detail.

299,-

KJØP
Hovedbilde Traxxas 93054-4 Black 4-TEC 3.0 Chevrolet Corvette ... Hovedbilde Traxxas 93054-4 Black 4-TEC 3.0 Chevrolet Corvette ...
Traxxas 93054-4 Black 4-TEC 3.0 Chevrolet Corvette ...
Traxxas Chevrolet Corvette Stingray (Black) 4-TEC 3.0 RTR The name synonymous with American sports car excellence: Corvette. Traxxas delivers the spirit and excitement of the all-new mid-engine Corvette in exacting scale detail on the new, larger 4-Tec 3.0 chassis. The new Traxxas 4-Tec 3.0 puts supercar performance in your hands with a new long-wheelbase, wide-track design. The faceted, Corvette Stingray body and its massive side intakes are duplicated to the millimeter. The simulated LT2 V8 is visible beneath the rear hatch. Authentic black-chrome wheels fill the fenders. Beautiful to display—with Traxxas performance that demands you to drive. ULTIMATE REALISM Every detail of the Stingray is faithfully captured. Beneath the rear “glass,” the engine bay shows off a realistic recreation of the 16-valve V8. Replica wheels shine in stealthy black chrome, and wide tires fill out the rear fender wheels to match the full-size machine’s muscular stance. NEW LARGER 4-TEC 3.0 CHASSIS The new 4-Tec® 3.0 chassis features a longer wheelbase and wider track developed specifically for the Corvette Stingray. In addition to ensuring accurate proportions, the longer, wider footprint improves stability and refines handling to deliver the steering precision and balanced feel of the mid-engine ‘Vette. NEW CLIPLESS BODY MOUNTING The Stingray’s meticulously detailed shape is unmarred by out-of-scale posts or clips. Instead, an integrated quick-release system secures the body invisibly. The hidden mechanism delivers a secure hold, and releases in seconds to provide chassis access. Specs: Length: 492mm Front Track: 204mm Rear Track: 202mm Total Width (incl. mirrors): 227mm Ground Clearance: 9mm Weight: 1.78kg (no battery) Height (ride): 130mm Wheelbase: 288mm Shock Length: Short (front and rear) Tire Diameter: 73mm (2.8 inches) Tire Width (front): 28mm (1.1 inches) Tire Width (rear): 32mm (1.3 inches) Wheel Diameter: 54mm (2.1 inches) Speed Control: XL-5™ Electronic Speed Control Motor (electric): Titan® 12T 550 (12-Turn) Transmission: Single Speed Direct Drive Overall Drive Ratio: 11.38 Differential Type: Sealed, Hardened Steel Bevel, Limited Slip Gear Pitch: 48 Chassis Structure/Material: Molded Tub / Nylon Composite Brake Type: Electronic Drive System: Shaft-Driven 4WD Steering: Dual-Bellcrank Radio System: TQ™ 2.4GHz Transmitter Servo: #2075 High Torque Waterproof Top Speed: 48+kph (with included optional pinion gear) Skill Level: 1 Battery Tray: 158mm long / 46mm wide / 23 or 26mm high What’s In The Box: Traxxas Corvette Stingray, Ready-To-Race® Model with Titan® 12T 550 Motor XL-5™ Waterproof Electronic Speed Control TQ™ 2.4GHz Radio System Quick Start Guide High Quality Maintenance Tools Optional High Speed Pinion Gear What You’ll Need: Battery Pack: Corvette Stingray requires the use of a 7-Cell NiMH “flat pack” or 2-Cell LiPo Battery equipped with a Traxxas High Current Connector Charger: Traxxas EZ-Peak Plus (model #2970) recommended AA Alkaline Batteries: Four AA alkaline batteries for the transmitter

4.195,-

4.595,-

KJØP
-9%
Hovedbilde Traxxas 3793 Shaft Slipper Clutch w/Roll Pin
Traxxas 3793 Shaft Slipper Clutch w/Roll Pin
This is a Slipper Clutch Shaft for the Traxxas Rustler XL                             and Stampede XL. FEATURES: Steel construction _         Roll pin pre-installed INCLUDES: One slipper clutch set SPECS:    Length:         1.98"          (50mm)           Diameter:        .21"          ( 5mm) COMMENTS: This part will fit both the standard and XL version of the Rustler or Stampede.

39,-

KJØP
Hovedbilde Traxxas 3691 Gearbox Halves Left & Right
Traxxas 3691 Gearbox Halves Left & Right
These are the left and right gearbox halves for the Traxxas Rusler and Stampede truck kits. Includes: One left and one right gearbox half. Features: Tough black nylon construction. Specs: N/A--these will only work with these two kits. Requires: All the internal gears and shafts           Assembly Comments: These do not include the hardware for assembly. Refer to manual for           appropriate screws.

99,-

Ikke på lager
Hovedbilde LouiseRC 3202C Tire & Wheel MT-Pioneer 2,8
LouiseRC 3202C Tire & Wheel MT-Pioneer 2,8" Chrome ...
  0-Offset for 2WD Rear Fits: Traxxas STAMPEDE 2WD Rear Traxxas STAMPEDE VXL 2WD Rear Traxxas RUSTLER 2WD Rear Traxxas RUSTLER VXL 2WD Rear Traxxas SKULLY 2WD Rear Traxxas CRANIAC 2WD Rear Arrma Vorteks Mega 2WD Front & Rear Arrma Vorteks BLS 2WD Front & Rear Arrma Granite Mega 2WD Front & Rear Arrma Granite BLS 2WD Front & Rear Team Durango DEST210 2WD Front & Rear Kyosho Rage 2WD Front & Rear Kyosho Mad Bug 2WD Front & Rear Also fits other 1/10 Scale Monster Trucks with 12 mm hex Specs: Wheel diameter: 2.8" Tire Diameter: 122 mm Tire Width: 68 mm Weight (each): 170 g Hex: 12 mm Offset: 0" Tire Compound: Soft Wheel finish: Chromed Nylon

299,-

329,-

KJØP
-9%
Hovedbilde Traxxas 1834A Body Clips Standard Black (12)
Traxxas 1834A Body Clips Standard Black (12)
Body Clips Standard Black (12)

29,-

39,-

KJØP
-26%
Hovedbilde Pro-Line 609208 Transmission Differential Seal Kit
Pro-Line 609208 Transmission Differential Seal Kit
 These are the Transmission Diff Seal Kit for the             Pro-Line Performance Transmission for the          Traxxas 2WD Slash, Electric Stampede, Bandit, and Rustler. FEATURES: Fiber, silicone, and aluminum construction INCLUDES: Two Fiber Gaskets, eight Spacers, four O-Rings

79,-

KJØP
Hovedbilde Traxxas 8121 Traction Boards TRX-4 Sport Hovedbilde Traxxas 8121 Traction Boards TRX-4 Sport
Traxxas 8121 Traction Boards TRX-4 Sport
Traction boards/ mounting hardware

99,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png