Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / E-revo 1/16 VXL 71076-8 / Traxxas 7080 Cover Plates/Differential/Gaskets VXL

Traxxas 7080 Cover Plates/Differential/Gaskets VXL

Art.nr: TRX 7080

39,-

Traxxas

Traxxas
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the Front and Rear Differential Cover Plates
         for use on the Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles.


FEATURES: Nylon construction
          Black in color


INCLUDES: One Front and One Rear Diff Cover Plate
          Two O-Rings
          Two Gaskets
          Three 2x14mm Button Head Screws


REQUIRES: Installation on the vehicle

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Yeah Racing YB6020B/S10 RC PTFE Bearing (8x12x3.5mm) ...
Yeah Racing YB6020B/S10 RC PTFE Bearing (8x12x3.5mm) ...
Yeah Racing RC PTFE Bearing (8x12x3.5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6020BS/10) RC Telfon Bearing (8x12x3.5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.    Preparation:     High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

89,-

99,-

KJØP
-10%
Hovedbilde Yeah Racing YB6009B/S10 RC PTFE Bearing (4x8x3mm) ...
Yeah Racing YB6009B/S10 RC PTFE Bearing (4x8x3mm) ...
Yeah Racing RC PTFE Bearing (4x8x3mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6009BS/10) RC Telfon Bearing (4x8x3mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

69,-

KJØP
Hovedbilde Yeah Racing YB6008B/S10 RC PTFE Bearing (4x7x2.5mm) ...
Yeah Racing YB6008B/S10 RC PTFE Bearing (4x7x2.5mm) ...
Yeah Racing RC PTFE Bearing (4x7x2.5mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6008BS/10) RC Telfon Bearing (4x7x2.5mm)/li> Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:     High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

69,-

KJØP
Hovedbilde RPM 73982 Front Bumper Black 1/16 E-Revo
RPM 73982 Front Bumper Black 1/16 E-Revo
Front Bumper for the Traxxas 1/16th Scale Mini E-Revo Quick Info – replaces stock Traxxas #713 – matching Rear Bumper also availabl Description At just over 2” wide, stock 1/16th scale Traxxas Mini E-Revo bumpers just aren’t large enough to provide any protection to the front or rear end of these cool little trucks. RPM has that problem solved with our new bumpers that measure in at a full 4” wide, almost double the width of the stock bumpers! Now that’s some serious protection. We also decided to go with a more scale look with a twin tube bumper design. Both front and rear bumpers have this new design while the front bumper also integrates an upper protective loop, indicative of a scale front bumper while also providing additional body protection on roll-overs. RPM bumpers for the 1/16th scale Mini E-Revo are molded from RPM materials, which means you know they’re tough! We also mold them in three color options – black, blue and red, matching our A-arms presently available for these mean little trucks while blending perfectly with any stock or aftermarket paint scheme. Affordable… Lightweight… Rugged… Great looking… What more can anyone ask for?  

139,-

KJØP
Hovedbilde Traxxas 7020 Ball Bearings Blue Rubber Sealed ...
Traxxas 7020 Ball Bearings Blue Rubber Sealed ...
These are the 8x12mm Blue Rubber Sealed Ball Bearings for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Ball bearings           Blue rubber sealed INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 12mm (0.47")           Inner Diameter: 8mm (0.31")           Width: 3.5mm (0.14")

49,-

Ikke på lager
Hovedbilde Traxxas 7174A Talon Tires On Gemini Wheels 1/16 E-Revo ...
Traxxas 7174A Talon Tires On Gemini Wheels 1/16 E-Revo ...
These are the Traxxas Talon Tires Pre-Mounted on Gemini Black Chrome Wheels. FEATURES: Nylon wheels           Gemini 5-spoke design           Black chrome in color INCLUDES: Two Pre-assembled Tires and Wheels with Foam Inserts REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 83mm (3.3")           Width: 48.3mm (1.9")           Hex: 12mm

279,-

Ikke på lager
Hovedbilde Savox SW-0250MG Plus Servo 5Kg 0,11s Metal Gear WP ... Hovedbilde Savox SW-0250MG Plus Servo 5Kg 0,11s Metal Gear WP ...
Savox SW-0250MG Plus Servo 5Kg 0,11s Metal Gear WP ...
SAVÖX SW-0250MG-PLUS - Water Proof Metal-Geared Mini Servo The SW-0250MG-PLUS is a waterproof, high torque, digital mini servo that performs! An excellent replacement for the standard servo found in Traxxas 1/16 scale vehicles. Features: New: Soft Start New: Sanwa SSR compatible Strong metal gear train for added durability Waterproof case design Ideal for cars and boats subject to water or snow Ideal for Traxxas 1/16 vehicles Specifications: Torque @4.8V: 3.5kg/cm Torque @6V: 5kg/cm Speed @4.8V: 0.14 sec/60 deg Speed @6V: 0.11 sec/60 deg Dimensions L x W x H: 29.5 x 14.0 x 32.5mm Weight: 25g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 80mA @4.8V, 100mA @6.0V Stall Current (at locked): 1000mA @4.8V, 1250mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 200 ± 5mm Output Gear Spline: 21 Tooth Bearings: 1BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

495,-

KJØP
Hovedbilde Traxxas 2419 Pinion Gear 48P 19T w/Set Screw Steel
Traxxas 2419 Pinion Gear 48P 19T w/Set Screw Steel
This is a Traxxas 19T 48P Pinion Gear. FEATURES: Metal construction           Grey in color INCLUDES: One 19T 48P Pinion Gear           One Set Screw REQUIRES: Installation  

39,-

Ikke på lager
Hovedbilde Traxxas 7138G Toe Link Front/Rear Green 1/16 Grave ...
Traxxas 7138G Toe Link Front/Rear Green 1/16 Grave ...
These are the Front and Rear Toe Links for the                 Traxxas Grave Digger Off-Road Truck. FEATURES: Molded composite plastic construction, green in color INCLUDES: Two Front and two Rear Toe Links           Eight Hollow Metal Balls

75,-

KJØP
Hovedbilde Traxxas 7118G Pushrod Molded Comp Green 1/16 Grave ...
Traxxas 7118G Pushrod Molded Comp Green 1/16 Grave ...
 These are the Pushrods for the                Traxxas Grave Digger Off-Road Truck FEATURES: Molded composite plastic construction, green in color INCLUDES: Four Pushrods           Eight Hollow Metal Balls

79,-

KJØP
Hovedbilde Traxxas 2082 Gear Set for VXL Micro Waterproof Servo
Traxxas 2082 Gear Set for VXL Micro Waterproof Servo
This is the Servo Gear Set for use on the                Traxxas VXL Micro Waterproof Servo TRX 2080. FEATURES: Nylon construction           Grey in color INCLUDES: One Output Gear           One Top Reduction Gear           One Center Reduction Gear           One Bottom Reduction Gear           Instruction sheet REQUIRES: Installation on the servo

59,-

KJØP
Hovedbilde Traxxas 7111 Clear Body 1/16 E-Revo VXL
Traxxas 7111 Clear Body 1/16 E-Revo VXL
This is the Clear Body for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR. FEATURES: Plastic construction Clear INCLUDES: One Clear 1/16 E-Revo Body One Window Masking Set One Decal Set REQUIRES: Polycarbonate paint of modeler's choice Installation on the vehicle SPECS:    Length: 283mm (11.1") Width: 100mm (3.9") Height: 75mm (3")       (B5)

239,-

259,-

KJØP
-8%
Hovedbilde Traxxas 7170 Talon Tires w/Foam Inserts 1/16 E-Revo ...
Traxxas 7170 Talon Tires w/Foam Inserts 1/16 E-Revo ...
These are the Talon Tires with Foam Inserts for use on the                  Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Talon tread           Gray foam inserts INCLUDES: Two Talon Tires with Foam Inserts REQUIRES: Installation on the vehicle           Tire Glue. SPECS:    Outer Diameter: 83mm (3.3")           Inner Diameter: 50mm (2")           Width: 49.4mm (1.9")

145,-

KJØP
Hovedbilde Traxxas 5130 Differential Oil 100K
Traxxas 5130 Differential Oil 100K
Oil, differential (100K wt) (0.7 oz (20cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. FEATURES: 100K weight oil INCLUDES: 0.7oz  (20cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

109,-

Ikke på lager
-9%
Hovedbilde Arrma 320432 Bumper Set: Kraton 6S
Arrma 320432 Bumper Set: Kraton 6S
Bumper Set: Kraton 6S AR320432 / ARAC3491 /3491

119,-

KJØP
Hovedbilde Excel 16005 K5 Plastic Heavy Duty Knife Hovedbilde Excel 16005 K5 Plastic Heavy Duty Knife
Excel 16005 K5 Plastic Heavy Duty Knife
Excel 16005 K5 Plastic Heavy Duty Knife K5 Red handle HD DETAILS Excel Blades - K5 Heavy Duty Knife #16005 Plastic hexagonal handle Equipped with a durable thick machined aluminum shaft Includes 4 jaw aluminum chuck for more secure blade positioning Shatter resistant safety cap to protect blade during storage Comes with a sharp angled #19 blade Can hold most blades, carving blades, routers, and fine saw blades  Used with : wood, leather, paper, cork, card-stock, stencils, film, photographs, tape, plastic, cardboard, foam boards and most other heavy-weight crafting.  Used by: graphic artists, designers, hobbyists, scrapbook artists, stamp artists, wood carvers and crafters. Fits: Excel Blades #2, #18, #19, #19A, #22, #23, #24, #26, #27, & #28 Fits: Excel Routers 20710, 20720, 20730 & 20740 routers Includes (1) K5 Plastic handle with (1) #19 Blade, .875 x 4.75 in – 2.2 x 12.1 cm Made in the USA

89,-

KJØP
Hovedbilde Traxxas 8610 Body Support Set E-Revo Hovedbilde Traxxas 8610 Body Support Set E-Revo
Traxxas 8610 Body Support Set E-Revo
Body reinforcement set Fits #8611 E-REVO body

95,-

KJØP
Hovedbilde Traxxas 1834A Body Clips Standard Black (12)
Traxxas 1834A Body Clips Standard Black (12)
Body Clips Standard Black (12)

29,-

39,-

KJØP
-26%
Hovedbilde Tamiya 87022 Molybdenum Grease
Tamiya 87022 Molybdenum Grease
Molybdenum disulfid fett. Perfekt til girkasser. Maksimerer effektiviteten til drivlinjen. Gir minst mulig friksjon. Skader ikke plastikkdrev.

69,-

Ikke på lager
Hovedbilde Yeah Racing YA-0194 Multi-Purpose Mini-Box (S) (BK) ... Hovedbilde Yeah Racing YA-0194 Multi-Purpose Mini-Box (S) (BK) ...
Yeah Racing YA-0194 Multi-Purpose Mini-Box (S) (BK) ...
Yeah Racing Multi-Purpose Mini-Box (S) (BK) L86x W55 x H20mm Description: Are you always stress about missing the important screws/parts when tuning up your RC Cars/Helicopters? Why don't you get our brand new Yeah Racing (#YA-0194) Multi-Purpose Mini Box! It definitely helps to tidy up the screws/parts storage ideally. It provides 6 partitions therefore you can store the screws/parts in a more convenient way. It is also small in size so you can tune the RC while in race track or even on your desktop without losing your screws/parts. Feature: Ideal For: screws/small parts storage Material: Plastic Color: Black Specification: Length: Approx. 86mm Width: Approx. 55mm Height: Approx. 20mm Include: Multi-Purpose Mini-Box (1 Pc)

29,-

KJØP
Hovedbilde Vapex AAA/R3 Battery NiMH 1100mAh 4pcs Hovedbilde Vapex AAA/R3 Battery NiMH 1100mAh 4pcs
Vapex AAA/R3 Battery NiMH 1100mAh 4pcs
The new Vapex Tech VTE1100AAA Series significantly extends the operation time of the devices with an enduring supply of battery energy, they are the most powerful and persistent rechargeable batteries designed to provide unparalleled battery support to bring out the best performance of popular digital devices. High Energy Density Long Cycle Life (more than 500 cycles) High Drain Performance (up to 3C) Fast Charge Performance (up to 2C)  Absolutely no Memory Effect Safety (Resealing Safety Vent) Diameter: 10.5 mm Length: 44.5 mm Weight: 13 g (each)  Content: 4xAAA 1100 mAh NiMH VTE batteries with storage case  

99,-

KJØP
Hovedbilde Kyosho MINI-Z MA030 EVO CHASSIS SET (AWD - 8500KV) Hovedbilde Kyosho MINI-Z MA030 EVO CHASSIS SET (AWD - 8500KV)
Kyosho MINI-Z MA030 EVO CHASSIS SET (AWD - 8500KV)
Kyosho MINI-Z MA030 EVO CHASSIS SET (AWD - 8500KV) New AWD chassis set with separate receiver unit to use with your choice of transmitter joins the EVO series lineup! The new AWD model MA-030EVO, based on the FWD MA-03F chassis, can use the separate receiver unit pioneered on the MR-03EVO (sold separately) The MINI-Z was originally designed with an integrated receiver, servo and speed controller, however on the MR-030EVO the receiver was designed to be purchased and installed as a separate unit to allow the model to be used with other makes of transmitter such as KYOSHO (KT18/EX-6/EX-6R/KT-531P/KT-432PT), KO (EX-2/EX-RR), Futaba (T7PX/T7XC/T4PM), Flysky (Noble NB4). In addition, the highest AWD series spec MA-020VE PRO included a 3-stage steering servo unit, but the new MA-030EVO includes the even higher spec 5-stage gear type from the MR-03. Also, a special CPU for servo control improves the control speed of positioning feedback and the updated control program delivers the best steering feel of any AWD model through improved responsiveness and linear response to driver control. The one-piece heatsink and aluminum case on the KYOSHO SPEED HOUSE XSPEED 85 (8500KV) brushless motor keeps it cool for optimal performance. The I.C.S. manager allows precision setting adjustments and also the switch to a brushed motor, which was not possible with previous chassis sets. Switch between drift and grip driving styles to experience the ultimate in AWD driving performance.   ●MA-030 AWD chassis is based on MINI-Z FWD MA-03F chassis. ●Chassis set comes with separate ESC and receiver unit. ●Includes KYOSHO SPEED HOUSE 85 brushless motor (KV8500). ●I.C.S manager enables precise setting control and use of either brushless or brushed motor. ●Independent CPU control with increased processing speed delivers even more precise control. ●Full ball bearing specifications reduces drive loss. ●Includes rear double wishbone suspension. ●Compatible with L（94mm） and LL（98mm） wheelbases. Only LL（98mm） can be used with rear double wishbone suspension set. ●Compatible with optional parts for the various MR-03F chassis models Remove the upper cover of the receiver on top of the chassis to install the receiver units compatible with KYOSHO, KO, FUTABA, and Flysky transmitters. Featuring high-performance VCS front suspension adopted from the previous models. Settings can be adjusted without using any tools just by replacing coil springs. Rear suspension includes the same strut type unit as the MA-03F chassis. Settings can be changed with toe control rods and cambered knuckles according to conditions. New Kyosho Speed House brushless XSPEED 85 (8500KV) motor features a one piece aluminum case that delivers efficient heat dissipation. Kit Contents     Assembled chassis with EVO main unit installed     Pinion gear (15T, 17T, 19T, 21T)     DWS conversion parts     Front width conversion parts     Spare wheel nuts and wrench     Center shaft for L wheelbase     Wide rear sus arms for DWS     Long swing shafts      Spur gears (27T, 29T, 31T)     Required For Operation MINI-Z EVO receiver unit compatible with the transmitter used Transmitter Auto Scale Collection (body, wheels and tires) 8 x AAA batteries Technical Data Scale:                                    1/27.6 Length:                                  126.0mm Width:                                     65.0 - 76.0mm (adjustable by wheel offset) Height:                                   36.0mm Chassis Type:                       MA-030 Wheelbase:                           94.0mm (strut rear suspension installed), 98.0mm (factory assembled) Weight:                                   135g Motor:                                      SpeedHouse Brushless 8500KV Gear Ratio:                             7.2, 6.4, 6.0, 5.7, 5.3, 5.0, 4.5:1 ＜Mountable Body＞ ・MAZDA Demio XD Touring(MZP442) ・Toyota PRIUS PHV(MZP443) ・Honda CIVIC Type R(MZP445) ・SUBARU WRX STI(MZP440) ・NISSAN GT-R R35(MZP417) ・NISSAN SKYLINE GT-R R32(MZP437) ・NISSAN SKYLINE GT-R R34(MZP427） ・AUDI R8 LMS(MZP444) ・NISSAN SKYLINE 2000GT-R KPGC10(MZP466) ・NISSAN SKYLINE GT-R R33(MZP468) ・CHEVROLET CAMARO ZL1(MZP242) ・SUBARU Impreza WRC 2008(MZP471) ・Toyota SPRINTER TRUENO AE86(MZP465) ・Toyota LEVIN AE86(MZP473) ・Toyota GR SUPRA(MZP450) ・Toyota GR SUPRA TRD(MZP452) Available with Wheel Change ・McLaren 12C GT3(MZP226) ・Lamborghini Murcirlago LP670-4SV(MZP215) ・McLaren F1 GTR(MZP237)　※DWS Not Compatible ・AUDI R8 LMS 2015/2016(MZP234) ・HONDA NSX(MZP233) ・McLaren P1 GTR(MZP235)　※DWS Not Compatible ・McLaren F1 GTR(MZP232)　※DWS Not Compatible ・CHEVROLET CORVETTE C8.R(MZP244) ・McLaren 720S GT3(MZP232)　※DWS Not Compatible(Mountable with Partial Diffuser Modification) ・TOYOTA 86(MZP155) ・HONDA NSX Concept-GT 2014(MZP249)

2.995,-

3.295,-

KJØP
-9%
Hovedbilde Tamiya 87023 Switch Lubricant
Tamiya 87023 Switch Lubricant
Tamiya 87023 Switch Lubricant    This is a Tube of Switch Lubricant from Tamiya. FEATURES: Designed for use on R/C speed controllers to prevent arcing, increase current flow and lengthen contoller life. Your speed controller, in order for it to do the job properly, must work smoothly and respond to the slightest movement of the transmitter control.  This switch lubricant will provide you with a speed controller that responds correctly each and every time! A plastic screw-on applicator tip (with lid) is provided. INCLUDES: One Tube of Switch Lubricant SPECS:    Net Weight:  10g COMMENTS: Do not overspray this lubricant with any type of spray lubricant.

59,-

KJØP
Hovedbilde Absima 2440013 Body Clips Medium Silver (10)
Absima 2440013 Body Clips Medium Silver (10)
 Body Clips Medium Silver (10)

59,-

KJØP
Hovedbilde Excel 20027 Knife Saw Blade #27 (5) Hovedbilde Excel 20027 Knife Saw Blade #27 (5)
Excel 20027 Knife Saw Blade #27 (5)
Knife Saw Blade #27 (5) DETAILS Blade 27, #27 Replacement Saw Blade 20027  Durable high carbon steel blade Available in a pack of 5 3" long, medium duty saw blade  This versatile replacement blade fits with all medium duty xacto style knives. Used for: brass tube, solid rod stock, plastic, wood, soft or thin metals, balsa wood, forge world resin, cork, foam, card-stock, pumpkin carving and most other medium to heavy duty  Fits with:  K2, K5 & K6 Handles  L – 3.130/ H – 0.310/ E – 2.455/ S – 0.130/ T – 0.025/ TPI – 15  Made in the USA KNIFE COMPATIBILITY This knife is best utilized for the following: Precision cutting, trimming, and stripping of paper, Foamcore plastic, Wood, Cloth, Film, Model making, Clay carving, and Pumpkin carving.

79,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png