Hopp til innhold

Traxxas 7073A SCT Tire On SCT Red Wheel 1/16 Slash (2)

Art.nr: TRX 7073A

229,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the Assembled SCT Tires and Wheels for use on the
                  Traxxas 1/16 Slash VXL 4WD RTR


FEATURES: SCT satin chrome wheels
          Red beadlock style
          SCT off-road racing tires


INCLUDES: One Left and One Right Assembled SCT Tire and Wheel


REQUIRES: Installation on the vehicle


SPECS:    Outer Diameter: 67.4mm (2.7")
          Width: 28.5mm (1.1")
          Hex: 12mm

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

These are the optional Steel Driveshafts for the Traxxas Summit VXL and all Traxxas 1/16 cars. FEATURES: Hardened steel construction INCLUDES: Center, Front and Rear Driveshafts

399,-

429,-

KJØP
-7%
Shocks, GTR composite (assembled, without springs) (2)

189,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS Dark Metallic Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling           An appropriate amount of paint for finishing one R/C model           This paint is impervious to oil and fuels, so it can be safely             used on gas-powered R/C bodies           The color of the lid represents the color of paint INCLUDES: PS Dark Metallic Blue Spray Can of Lacquer SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models           Highly flammable

109,-

KJØP
These are the optional Double Orange Rate GTR Shock Springs for use on the                    Traxxas 1/16 Slash VXL 4WD RTR. FEATURES: Steel construction           Red in color           0.82 rate, double orange INCLUDES: Two GTR Shock Springs REQUIRES: Installation on the vehicle SPECS:    Length: 26mm (1")           Outer Diameter: 13.3mm (0.52")           Inner Diameter: 10.9mm (0.43")           Wire Diameter: 1.15mm (0.05")

49,-

KJØP
These are the optional Toe Links for use on the                        Traxxas 1/16 Slash Vehicles. FEATURES: Aluminum construction           Anodized red in color INCLUDES: Four Toe Links           Eight Hollow Balls           One 5mm Wrench REQUIRES: Installation on the vehicle SPECS:    Length: 67mm (2.6")           Diameter: 5mm (0.20")

409,-

KJØP
This is the Complete Differential Assembly for use on the                   Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel and nylon construction INCLUDES: One Complete Differential Assembly REQUIRES: Installation on the vehicle

289,-

KJØP
This is the Chassis for use on the                  Traxxas 1/16 E-Revo, Slash VXL and Rally VXL Vehicles. FEATURES: Nylon construction           Grey in color INCLUDES: One Chassis REQUIRES: Installation on vehicle SPECS:    Length: 245mm (9.6")           Width: 107mm (4.2")           Height: 40mm (1.6")

189,-

Ikke på lager
This is the Transmission Gear Set for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon input and output gears           Steel idler gear INCLUDES: 18T Input Gear           25T Input Gear           13T Idler Gear           35T Output Gear           3x13.75mm Screw Pin REQUIRES: Installation on the vehicle

129,-

KJØP
These are the Front and Rear Gearbox Halves for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Front and Rear Gearbox Halves REQUIRES: Installation on the vehicle  

59,-

KJØP
This is the Rear Bulkhead for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction, black in color INCLUDES: Two Rear Bulkhead Sections           Four 3 x 10mm Button Head Screws           One 2.5 x 22mm  Socket Head Cap Screw REQUIRES: Installation on the vehicle

79,-

KJØP
 This is the Driveshaft Assembly for use on the                      Traxxas 1/16 Slash VXL FEATURES: Nylon construction           Black in color           Fits left or right INCLUDES: One Fully Assembled Driveshaft Assembly REQUIRES: Installation on the vehicle

99,-

KJØP
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
NB! Denne erstatter TRX 5480 This is the 17mm Splined Wheel Wrench from Traxxas. FEATURES Nylon construction, black in color  Compatible with the 17mm splined nuts used on many Traxxas vehicles INCLUDES 17mm splined wheel wrench

39,-

KJØP
       This is the Motor Cover Plate for the Traxxas 1/16 scale                        Fiesta and Kyle Busch Race Truck. FEATURES: Composite construction INCLUDES: Motor Cover, Motor Mount Hinge Post, 3x10mm Screw with split and             Falt Washers, 2.5 x 4mm Screw and two 3x8mm Screws REQUIRES: Installing over motor

69,-

KJØP
         This is the 45T Spur Gear for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One 45T Spur Gear REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 24.75mm (0.97")           Inner Diameter: 5.5mm (0.22")           Width: 7mm (0.28")

39,-

KJØP
This is the Motor Plate for the 1/16 scale from Traxxas. FEATURES: Blue aluminum construction           Holds 550 size motor in place INCLUDES: One motor plate REQUIRES: Installation and attaching motor

89,-

KJØP
This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 31 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .69" (17.5mm)

39,-

49,-

KJØP
-20%
This is the Rear Suspension Arm Set for use on the                 Traxxas 1/16 Slash (VXL) 4WD RTR and Traxxas 1/16 Rally VXL FEATURES: Nylon construction           Black in color INCLUDES: One Lower Right Suspension Arm           One Lower Left Suspemsion Arm           Two Lower Left/Right Suspension Arms REQUIRES: Installation on the vehicle

99,-

KJØP
This is the Steering Arm for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Upper and Lower Steering Arm           Steering Link           Servo Horn           Servo Saver           Servo Saver Spring           Servo Horn Mount           Two Ball Studs           Front and Rear Shock Mounts           Four 2.5x18mm Cap Head Screws REQUIRES: Installation on the vehicle

149,-

Ikke på lager
This is the Front Suspension Arm Set for use on the                   Traxxas 1/16 Slash (VXL) 4WD RTR and Traxxas 1/16 Rally VXL FEATURES: Nylon construction           Black in color INCLUDES: One Upper Right Suspension Arm           One Lower Right Suspension Arm           One Upper Left Suspension Arm           One Lower Left Suspension Arm REQUIRES: Installation on the vehicle

99,-

KJØP
This new spray paint for clear polycarbonate bodies is designed for the 1/10 R/C Toyota 86 R/C car. It contains fine metallic particles to accurately recreate the unique orange paint finish on a polycarbonate body.   FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

99,-

119,-

KJØP
-17%
This is the 1/10 scale electric powered, radio controlled, 4WD                    1973 Ford Bronco Off-Road Kit from Tamiya. FEATURES: Chassis: CC-01, plastic tub construction           Drive: Four wheel drive, shaft driven           Motor: 540 electric motor           Electronic Speed Control: TEU-104BK with reverse           Lights: Tamiya TLU-01  LED light unit with four LED lights,             see COMMENTS           Shocks: Oil-filled, black plastic construction           Gearbox: Front and rear sealed gearbox           Differentials: Planetary gear, rear differential may be locked             during assembly           Transmission: Single speed           Tires: Semi-pneumatic all-terrain, rubber construction 1.2" (30mm)             wide, 3.5" (90mm) diameter           Wheels: Five spoke chrome plated plastic, 1" (26mm) wide, 1.9" (48mm)             diameter           Bumper: Front, plastic construction, black in color           Suspension: Front, long stroke double wishbone                       Rear, four link rigid           Camber Tie Rods: Fixed non-adjustable           Caster: Adjustable, caster/toe-in refers to the angle of the front             suspension when viewed from the side of the car in relation to the             chassis           Steering: Bell-crank type with servo saver and adjustable linkage INCLUDES: Tamiya '73 Ford Bronco kit with oil-filled shocks, 540 motor, ESC,             clear body, tires, wheels, LED light kit, shock oil, 16 tooth             pinion gear, spur gear, instructions                                                                               _ REQUIRES: Radio: 2-Channel with 1 Servo           Eight AA batteries for transmitter           Battery: 6-cell stick pack w/ standard connector           Charger: AC/DC timed or peak for 6-cell battery           Misc. Items: Building and track equipment SPECS:      VEHICLE-           Length: 16.8"  (426mm)           Width:    7.7" (195mm)           Height:   8.5" (215mm)           Weight: 53.3oz (1510g)           Wheelbase: 9.9" (252mm)             BODY-           Length: 15"    (381mm)           Width:   7.3"  (185mm)           Height:  5.3"  (135mm) COMMENTS: The TLU-02 Light Control Unit (not included) can be installed for             more light effects.             To paint body to match color scheme on box, order the following             Tamiya colors; PS-1 White,   PS-34 Bright Red                                    PS-5 Black,    TS-17 Gloss Aluminum

2.795,-

2.995,-

KJØP
-7%
These are the Left and Right Axle Carriers for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Left Axle Carrier           One Right Axle Carrier REQUIRES: Installation on the vehicle

79,-

KJØP
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png