Hopp til innhold

Traxxas 5280 Control Box Complete

Art.nr: TRX 5280

189,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a Complete Control Box for the Easy Start.
 This houses the 7.2V battery for the Easy Start, and provides the start button.
 Also for the Tmaxx 3.3

 


FEATURES

Black plastic construction.
 Green motor and glow plug led's.
 Red start push button.

 


INCLUDES

Two easy start control box halves.

 


REQUIREMENTS

7.2V battery.
 Onboard easy start 2 components.

 


SPECIFICATIONS

 Length: 180mm (7.08")
 Width: 50mm (1.96")

 


COMMENTS

This is for use with the Easy Start 2

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Kvalitets gløder med lader, den har også ett analogt meter for å vise pluggens tilstand. Laderen lader med 350 mA, og lader gløderen opp på 5 timer.

329,-

399,-

KJØP
-18%
Pluggadapter for tilkobling av Tamiya plugg (han) til Traxxas (hun) Bruksområde f.eks. med børsteløse hastighetsregulatorer eller ladekabler

69,-

79,-

KJØP
-13%
MALE RED BEC CONNECTOR

23,-

KJØP
High Channel Receiver Battery Box

59,-

KJØP
Kvalitets NiMh pakke med meget høye utladings egenskaper! Rimelig pakke som leverer! Kapasitet på 3300 mAh Spenning er 7.2V TAMIYA CONNECTOR Lengde: 135mm Høyde:    24mm Bredde:   46mm

299,-

329,-

KJØP
-9%
Wiring harness for RX Power Pack, Traxxas nitro vehicles (includes on/off switch and charge jack)

69,-

KJØP
Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

49,-

59,-

KJØP
-17%
 This is the Stock Replacement Clutch Shoes and Spring for the Nitro Stampede.              These shoes are located underneath the clutchbell. FEATURES: Black in color INCLUDES: Two clutch shoes           One wrap around spring REQUIRES: Installation onto vehicle. SPECS:    Length of shoe: 22.6mm (0.89")           Height: 8mm (0.32")

89,-

KJØP
Sports Pack Ni-Mh 2200 SCR Team Orion (7.2V) - Deans Plug

209,-

KONTAKT
This is the Traxxas Driveshaft Assembly Rebuild Kit for the Revo/Maxx. FEATURES: Restores performance to worn driveshaft components INCLUDES: Four Rubber accordian style dustboots, pins, and lube for two             driveshaft assemblies  

89,-

KJØP
This is the replacement Pivot Ball and Dust Cap Boot Set             for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction           Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots           Four Black Dust Boot Retainer           Four Blue Notched Dust Boot Retainer           Four Blue Rubber Boot Plugs           Four nylon Pivot Ball Retainers           Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

KJØP
-10%
This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES: Used to treat foam air filter elements to increase their filtering             capacity, and extend engine life.           1.75 fluid ounce bottle provides oil for many applications, and is             still small enough to fit easily into a field bag or tool box. INCLUDES: One 1.75 oz bottle of Air Filter Oil           One applicator tip REQUIRES: Working oil into foam air filter element and squeezing out the excess SPECS:    Fluid Ounce: 1.75 oz (50cc)           Bottle Size-            Height:   3.5" (89mm)            Diameter: 1.5" (38mm)

69,-

Ikke på lager
This is a package of three Air Filter/Pre-Filter Foam Inserts  for the Traxxas .20 cu in (3.3cc) racing engine.   FEATURES Constructed of foam and pre-oiled to trap dirt  Pre-Filter for extra filtration   INCLUDES Three Air FIlter Inserts for the Traxxas 3.3 engine   REQUIREMENTS Installing in air filter boot on engine     SPECIFICATIONS  Height: 38mm (1.5")  Diameter: 38mm (1.5")

129,-

139,-

KJØP
-7%
Big Block Engine Installation Kit Revo 3.3/ Slayer Pro Big block Installation kit (engine mount and required hardware) The big block installation kit makes it easy to bolt primal big block engine torque into your Traxxas truck. No matter which big block you choose, your truck's low center of gravity, lightweight, and efficient drivetrain means you’ll get the most performance out of every ounce of horsepower you put in. The big block installation kit includes all the components and hardware necessary for a factory engineered, quality installation.

649,-

679,-

KJØP
-4%
7.2V 3000mAh - Bronto SP - Ni-Mh - Tamiya plugg   Lengde - 135mm Bredde - 47mm Høyde - 24mm

295,-

KJØP
G.T.Power N802 Nimh CHARGER 2A – 20W AC   N802-laderen er en enkel, rask og sikker NiMH lader i en kompakt utførelse. Med det idiotsikre “plug and charge” -grensesnittet kobler du bare til batteriet og trykker på knappen, hvorpå laderen automatisk velger riktig ladestrøm. Støtter 4 – 8 celler med opptil 2 ampere lading. Dette gir deg en minimal ventetid. Laderen kobles til 220V, og gir ca 2A lading. Svært få enkle ladere kombinerer 220V AC-inngang, og en 2-amp lade mulighet. Dette er en automatisk lader, og kutter ladingen da batteriet når sin “peak” eller topp. AC inngang Har toppdeteksjonsladekretser. (Delta peak) Støtter 4 – 8 NiMH / NiCd-celler. Mikroprosessor kontrollert. 2A lade strøm (maks. 20W). Enkel betjening av en knapp. Inkluderer Deans (han) kontakt og Tamiya (han) Kompakt design 1x N802 NiMH / NiCd lader 1x strømledning 1x Tamiya-adapter 1x bruksanvisning   The N802 charger is a simple, capable and safe NiMH peak detection charger in a compact package. With its foolproof ‘plug and charge’ interface you just connect your battery and press the button, whereupon the charger automatically selects the appropriate charge current. Supporting 4 – 8 cells at up to 2 amps on AC power, it gets you going again with a minimal wait. Sleek and compact in design this neat unit will also help to keep your workspace uncluttered. Very few chargers combine the simplicity of AC input, a 2 amp cabability, and the safety of peak detection charging for NiMH batteries, with such style and affordability. AC input power. Features peak detection charging circuitry. Supports 4 – 8 NiMH / NiCd cells. Micro processor controlled. 2A charge rates (20W maximum). Simple one button operation. Includes Deans (male) connector and Tamiya (male) Compact design 1x N802 NiMH/NiCd charger 1x Power lead 1x Deans to Tamiya adaptor 1x Instruction manual

269,-

289,-

KJØP
-7%
FLYSKY GT2B features 3 channel operation, interchangeable hand grips, adjustable steering dual-rate, servo reversing and a rechargeable li-ion battery which eliminates the need for buying expensive AA batteries. The li-ion battery also makes this transmitter much lighter, which gives the user a great feel during use. No more lugging around a heavy transmitter holding 8 x AA batteries! Features: • Reliable, interference free 2.4GHz AFHDS signal operation • 3CH operation • Rechargeable li-ion transmitter battery • Interchangeable rubber hand grips • Adjustable steering dual-rate • Servo reversing Transmitter Specs: Model: Car/Boat RF Power: 20dBm (100mW) max Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Low Voltage Warning: Yes Charge Port: Yes (USB- charge cable included) Power: 3.7V 800mAh li-ion (included) Weight: 270g Receiver Specs: Model: Car/Boat RF Receiver Sensitivity: -105dBm Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Failsafe: Yes Power Port: Yes (VCC) Power: 4.5~6.5 VDC Weight: 5g Antenna Length: 26mm Dimensions: 37.6 x 22.3 x 13mm Includes: FS-GT2B transmitter FS-GT2B 3CH receiver 3.7V li-ion rechargeable battery pack Optional second rubber hand grip Antenna tube USB charge cable Bind plug User manual

579,-

699,-

KJØP
-17%
 This is the Updated Wire Harness for the EZ Start and EZ Start 2 Systems.     This harness has the white connector that the EZ Start pack plugs into. FEATURES: Extra long 12" wires           Pre-installed connectors and eyelets INCLUDES: One wire harness           One black connector bracket REQUIRES: Installation onto vehicle equipped with EZ Start or EZ Start 2. COMMENTS: The differences between this and the old design are:  Longer wire            leads, L-shaped motor connectors, and one continuous glow plug wire.

65,-

KJØP
Wireless interface technology — a first for RealFlight. When getting to the flying field is a problem, RealFlight is the answer. You can keep your skills sharp anytime you want, and because the simulation is so accurate, you'll fly with confidence when you do get back to the flight line. With the included interface, you control the sim with the same SLT transmitter you take to the field! All you have to do is plug the dongle into your computer's USB port. A set-up window helps you quickly configure RealFlight to be controlled by the same radio you use to fly real models, whether they're Tx-R or equipped with AnyLink 2. And because the interface is wireless, you're not tethered to your PC. RealFlight flies more like "real life" than any other R/C sim. Reach ever-greater levels of expertise using your favorite radio and this wireless SLT interface-equipped edition of the world's #1 R/C flight simulator! To find out more about the SLT protocol, visit tacticrc.com/slt For over 17 years RealFlight has been R/C's best-selling flight simulator, and RF7.5 provides even more reasons why! Over 140 aircraft, encompassing all types of airplanes, helis, sailplanes and multi-rotor designs Over 40 PhotoField™ and 3D flying sites to explore Game-like Challenges, including new Challenges featuring multi-rotor models RealPhysics™ 3D, expanded to include multi-rotor flight TrueView™ realistic lighting Reset/Rewind on the InterLink Elite controller Multiplayer and MultiMode Onscreen camera controls Heads-Up Display (HUD) Water takeoffs and landings Night flying Welcome Screen Real Rendering™ AccuModel aircraft editor with tabbed dialogues FlexiField™ flying site editor TruFlo™ Wind Dynamics Blade stop autorotations Unlimited combat with any weaponry Because no two pilots are identical, RF7.5 is available in 5 different editions, and its the only flight simulator that offers this many options. The software for each version is identical, so no matter which RF7.5 you choose youll experience all of the realism and features that have made RealFlight #1. Youll also find new enhancements such as a wireless transmitter interface, RealPhysics technology expanded to include multirotor flight, an even more user-friendly Aircraft Editor, several additional aircraft designs to fly, new Challenges that feature multi-rotor aircraft, and much more.

349,-

1.199,-

KJØP
-71%
Length: 40 mm Height: 39 mm Width: 19 mm Weight: 43 g Max Voltage: 6,0 V Speed at 6,0V: 0,22 sec/60° Torque at 6,0V: 3,0 kg/cm

319,-

349,-

KJØP
-9%
Type of Battery: NiMH Capacity: 1600 mAh Number of cells: 5 Voltage: 6,0 V

269,-

KJØP
This is the Air Filter Set  for the Traxxas Nitro Jato Stadium Truck.     FEATURES Plastic construction  Black in color   INCLUDES One Air Filter Housing  One Foam Insert Element  One Rubber Filter Base  One Cable Tie   SPECIFICATIONS  Diameter at Mounting Base: 0.55" (14mm)  Diameter of Outer Housing: 1.6" (40mm)  Height Including Mounting Base 1.62" (42mm)   REQUIREMENTS Assembly onto carburetor

149,-

KJØP
These are Replacement Clutch Shoes for the Traxxas T-Maxx.           These mount to the flywheel and engage the clutch. FEATURES: Carbon Construction           Black in Color INCLUDES: Two Clutch Shoes           One Spring REQUIRES: Assembly into the clutch system.

95,-

KJØP
This is the Motor and Pinion Gear               for the Traxxas EZ Start 2 (R) System, TRX 5270R FEATURES: Pre-installed 10 tooth pinion gear INCLUDES: Motor and Pinion Gear for the Traxxas EZ Start 2 (R) System REQUIRES: Installing inside EZ Start 2 (R) case SPECS:    Length with shaft: 2.35" (59mm)           Can diameter: 1.09" (28mm)

189,-

KJØP
  This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx         or any other vehicle that you would like to mount this in.   This part goes between the receiver and hooks to the steering or motor or                engine to provide the power to either of these. FEATURES: Yields Increased Power and Speed. INCLUDES: One High Torque Servo with J style connector. REQUIRES: Mounting into vehicle. SPECS:    Length:  1.6" (40.5mm)           Width:   .8"  (20.5mm)           Height:  1.43" (36mm)           Torq:    80 oz/in           Weight:  1.58oz (45g)

389,-

419,-

KJØP
-7%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png