Traxxas

-17%

Pro-Line 276303 Impulse Pro-Loc Black Wheels w/Stone Gray Ring

Art.nr: 2763-03

499,-

~~599,-~~

- 17%

Proline

Proline

På lager: 5

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is a pair of Pro-Line Impulse Pro-Loc Black Wheels with Stone Gray Rings for the Traxxas X-Maxx.

FEATURES

Pro-Loc technology for use with Pro-Loc tires enables bead-locscrews to pass through the tire rubber before tire is pinched by the outer beadlock ring for maximum mounting security

INCLUDES

Two Impulse Pro-Loc Black Wheels

Four Stone Gray Pro-Loc Rings

Eighty M3x20mm Socket Head Cap Screws

REQUIREMENTS

Tires such as the #10131-00 Pro-Line Badlands MX43 Pro-LocTires

SPECIFICATIONS

Diameter: 8.30" (211mm)

Width: 3.82" (97mm)

Produsent

Proline

Proline

Kunder kjøpte også

Hovedbilde Traxxas 7829R Suspension Arm Upper F/R, R/L HD Red (2) ...

Hovedbilde Traxxas 7829R Suspension Arm Upper F/R, R/L HD Red (2) ...

Traxxas 7829R Suspension Arm Upper F/R, R/L HD Red (2) ...

Traxxas 7829R - HD Suspension arm Red, upper (right or left, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

119,-

Hovedbilde Traxxas 7220 ExoCage 1/16 Summit VXL

Traxxas 7220 ExoCage 1/16 Summit VXL

OBS: Husk at det ikke er med lysbøyle i dette settet, slik at det kan være nødvendig med foringer for å få skruene til å passe framme på taket, der hvor man på orginalen har festet skruene gjennom lysbøylen. This is an Exocage for the Traxxas 1/16 Summit VXL. FEATURES Nylon construction Black in color INCLUDES One exocage Mounting hardware REQUIREMENTS Installation over vehicle body SPECIFICATIONS Length: 11.5" (292.1mm) Width: 4.75" (120.65mm) Height: 3.5" (88.9mm)

185,-

Hovedbilde Traxxas 7211 Body 1/16 Summit VXL

Traxxas 7211 Body 1/16 Summit VXL

This is the optional Clear Body for the Traxxas Summit VXL, TRAD30**. FEATURES: Trimmed and ready to paint INCLUDES: Clear Body for the Traxxas Summit VXL REQUIRES: Polycarbonate safe spray or brush-on paint Grille and decals SPECS: Length: 11.4" (291mm) Width: 5" (127mm) Height: 3" (76.2mm) COMMENTS: Does not include black plastic outer frame or roof-mounted light bar (B5)

249,-

269,-

-7%

Hovedbilde Traxxas 6495X Pinion Gear 22T 1.0M Pitch for 5mm shaft

Traxxas 6495X Pinion Gear 22T 1.0M Pitch for 5mm shaft

Pionion Gear, 22-T (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

79,-

89,-

-11%

Hovedbilde Hudy 190070 Power Tool set (5)

Hovedbilde Hudy 190070 Power Tool set (5)

Hudy 190070 Power Tool set (5)

INFORMATION HUDY offers a range of power tool tips for electric screwdrivers, manufactured from world-renowned HUDY Spring Steel™ and available in most popular sizes. The end of the tips are manually ground for maximum precision and to perfectly fit the intended fastener. Additionally heat treated and hardened for maximum lifespan. Set includes: #112071 Power Tool Tip Allen 2.0 x 90 mm #112571 Power Tool Tip Allen 2.5 x 90 mm #113071 Power Tool Tip Allen 3.0 x 90 mm #164071 Power Tool Tip Phillips 4.0 x 90 mm HUDY offers a range of power tool tips for electric screwdrivers, manufactured from world-renowned HUDY Spring Steel™ and available in most popular sizes. The end of the tips are manually ground for maximum precision and to perfectly fit the intended fastener. Additionally heat treated and hardened for maximum lifespan. Set includes: #112071 Power Tool Tip Allen 2.0 x 90 mm #112571 Power Tool Tip Allen 2.5 x 90 mm #113071 Power Tool Tip Allen 3.0 x 90 mm #164071 Power Tool Tip Phillips 4.0 x 90 mm HUDY offers a range of power tool tips for electric screwdrivers, manufactured from world-renowned HUDY Spring Steel™ and available in most popular sizes. The end of the tips are manually ground for maximum precision and to perfectly fit the intended fastener. Additionally heat treated and hardened for maximum lifespan. Set includes: #112071 Power Tool Tip Allen 2.0 x 90 mm #112571 Power Tool Tip Allen 2.5 x 90 mm #113071 Power Tool Tip Allen 3.0 x 90 mm #164071 Power Tool Tip Phillips 4.0 x 90 mm #165871 Power Tool Tip Phillips 5.8 x 90 mm

499,-

Hovedbilde Tamiya 87063 Masking Tape 40mm

Hovedbilde Tamiya 87063 Masking Tape 40mm

Tamiya 87063 Masking Tape 40mm

This is a Roll of 40mm Masking Tape from Tamiya. FEATURES This is a thin, self-adhesive paper tape, developed for model applications. Yellow in color. Flexible. Easily applied to curved surfaces making it ideal for masking off areas for painting, etc. INCLUDES One Roll Of Masking Tape SPECIFICATIONS Width: 40mm

65,-

Hovedbilde Tamiya 87179 Masking Tape for Curves 5mm

Hovedbilde Tamiya 87179 Masking Tape for Curves 5mm

Tamiya 87179 Masking Tape for Curves 5mm

En fantastisk maskeringsfilm som tillater å maskere kurver! Denne er helt utrolig og må bare prøves. Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively. Length of roll: 20m A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas. Use of narrower tape is recommended for sharper curves.

69,-

Hovedbilde Tamiya 81532 Acrylic Mini X-32 Titanium Silver 1/3 oz

Tamiya 81532 Acrylic Mini X-32 Titanium Silver 1/3 oz

This is a 10ml Jar of Tamiya color Acrylic Paint "Mini" (Titanium Silver). For Adult Modelers Age 14 and Older. FEATURES: Handy paint for hobby use. Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin and styrofoam. It can be washed away with plain water if done prior to curing. Glass jar with a plastic, color coded, screw-on lid. Paint number X-32 on the Tamiya Color Chart. INCLUDES: One Jar of Acrylic Paint "Mini" (Titanium Silver) REQUIRES: Stir Stick SPECS: Volume: 10ml (1/3 fl oz)

39,-

Hovedbilde Traxxas 8555 Driveshaft Center Rear (Fully Assembled)

Traxxas 8555 Driveshaft Center Rear (Fully Assembled)

Driveshaft, center rear, 6061-T6 aluminum (black-anodized) (fully assembled)/ 3mm screw pin (2)

269,-

299,-

-10%

Hovedbilde Traxxas 8553 Stub Axle (use with Driveshaft 8550)

Traxxas 8553 Stub Axle (use with Driveshaft 8550)

Stub axle, steel (use with #8550 driveshaft)

135,-

Hovedbilde Tamiya 87164 Masking Tape/Plastic Sheeting 550mm

Tamiya 87164 Masking Tape/Plastic Sheeting 550mm

This is the Tamiya Masking Tape/Plastic Sheeting. FEATURES Plastic construction Masks large areas such as R/C car bodies Masking tape is preattached to plastic sheeting for sharply defined edges Peels off easily after painting INCLUDES Roll of Tamiya Masking Tape/Plastic Sheeting SPECIFICATIONS Length: 32.8' (10m) Width: 21.6" (550mm)

99,-

Hovedbilde Tamiya 87177 Masking Tape for Curves 2mm

Tamiya 87177 Masking Tape for Curves 2mm

This is the 2mm Wide Masking Tape for Curves from Tamiya. FEATURES Constructed of soft resin material that allows tape to adhere in a curve while preventing paint from seeping into masked-off areas Use of narrower tape is recommended for sharper curves INCLUDES 2mm Wide Masking Tape for Curves SPECIFICATIONS Width: 0.079" (2mm) Length: 65.6' (20m)

69,-

Hovedbilde Tamiya 87035 Masking Tape Refill 18mm

Tamiya 87035 Masking Tape Refill 18mm

This is an 18 Meter Roll of 18mm Tamiya Masking Tape Refill. FEATURES: This is a thin, self-adhesive paper tape, developed for model applications. Flexible. Easily applied to curved surfaces making it ideal for masking off areas for painting, etc. INCLUDES: One Roll Of Masking Tape SPECS: Length: 18m Width: 18mm

49,-

Hovedbilde Tamiya 87031 Masking Tape 10mm

Tamiya 87031 Masking Tape 10mm

This is a 10 Meter Roll of 10mm Tamiya Masking Tape. FEATURES: This is a thin, self-adhesive paper tape, developed for model applications. Flexible. Easily applied to curved surfaces making it ideal for masking off areas for painting, etc. Comes in a plastic, reusable dispenser. Dispenser teeth cuts the tape to your desired length. INCLUDES: One Roll Of Masking Tape SPECS: Length: 10m Width: 10mm

59,-

Hovedbilde Radient 010002 DEANS PAIRS INCLUDING HEAT SHRINK ...

Radient 010002 DEANS PAIRS INCLUDING HEAT SHRINK ...

DEANS PAIRS INCLUDING HEAT SHRINK (10PCS)

119,-

Hovedbilde Hobbywing Motor EzRun 5687 1100kV Sensorless

Hovedbilde Hobbywing Motor EzRun 5687 1100kV Sensorless

Hobbywing Motor EzRun 5687 1100kV Sensorless

Hobbywing EzRun 5687 Brushless 1100KV Sensorless Motor Features: 4 pole rotor for high torque, fast acceleration response and stable power output Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%) CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearings for high durability and smoothness Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency This EZRUN motor is a perfect match for the HOBBYWING EZRUN MAX6/5 ESC Temperature sensor port provides all-round protection to the power system (Hobbywing will develop some ESCs with the motor thermal protection function to pair these motors in future) Specs: Type: Brushless Sensorless Poles: 4 KV: 1100 LiPo: 3-8S Resistance: 0.0041Ohm No Load: 4.1A Max Current: 200A Power: Max 5800W Outer Dia: 56mm Length: 87mm Shaft Dia: 8mm Shaft Length: 31mm Weight: 916g Application: 1/5 & 1/6 Light-Duty Vehicles

2.095,-

2.195,-

-5%

Hovedbilde Traxxas 6745 Gear 32P 9T

Traxxas 6745 Gear 32P 9T

This is a 9 Tooth 32 Pitch Pinion Gear for the Traxxas. FEATURES: Machined Steel Designed for a 3mm shaft INCLUDES: One 9 tooth Pinion Gear One 3 x 4mm Set Screw

45,-

55,-

-18%

Hovedbilde Traxxas 7713X Body Reinforcement Rear X-Maxx

Traxxas 7713X Body Reinforcement Rear X-Maxx

Body support, rear/ 3x15mm CS (2) / 3x15mm flat-head machine (2) (fits X-Maxx®)

179,-

Hovedbilde Traxxas 2595 Screws 4x35mm Button-Head Machine (Hex ...

Traxxas 2595 Screws 4x35mm Button-Head Machine (Hex ...

These are the 4x35mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck FEATURES Steel construction Secures the toe links to the steering blocks INCLUDES Six 4x35mm Button Head Machine Screws REQUIREMENTS 2.5mm Hex Wrench SPECIFICATIONS Diameter: 4mm Length: 35mm

39,-

Hovedbilde Traxxas 7755 Driveshaft assembly center Aluminum

Traxxas 7755 Driveshaft assembly center Aluminum

Driveshaft assembly, center, aluminum

159,-

169,-

-6%

Hovedbilde Traxxas 3362 Heat sink, Velineon 1200XL & 1600XL

Traxxas 3362 Heat sink, Velineon 1200XL & 1600XL

The aluminum heat sink for Velineon® 1200XL and 1600XL brushless motors draws heat out of the motor. Passer: X-Maxx 77096-4 X-Maxx Ultimate 77097-4 X-Monster Chassis 77036-4

219,-

239,-

-8%

Hovedbilde Traxxas 7735 Bumper Front X-Maxx

Traxxas 7735 Bumper Front X-Maxx

This is the Front Bumper for the Traxxas X-Maxx Monster Truck FEATURES One-piece molded composite plastic construction INCLUDES Front Bumper SPECIFICATIONS Length: 8.7" (222mm) Height: 3.4" (87mm) measured at grille guard

109,-

119,-

-8%

Hovedbilde Traxxas 8275 Rod End Set Complete (22) TRX-4

Traxxas 8275 Rod End Set Complete (22) TRX-4

Rod End Set Complete (22) TRX-4

179,-

199,-

-10%

Hovedbilde RPM 81732 Oversized Rear Axle Carriers for X-Maxx ...

RPM 81732 Oversized Rear Axle Carriers for X-Maxx ...

RPM Oversized Rear Axle Carriers for X-Maxx (Outer Bearings Not Included) Replaces stock Traxxas #7752 Quick Notes: Replaces stock Traxxas #7752 Includes two oversized inner rear bearings (20x32x7mm) Outer bearings not included (stock bearings are used) Sold in pairs (1 – left and 1 – right) RPM Oversized Rear Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of these massive beasts. The first being durability. We designed these carriers to handle some serious abuse. RPM Oversized Axle Carriers are BEEFY, with massive support ribs for the strongest possible carriers available. The other area of improvement comes in the form of larger inner bearings. How large? MASSIVE! The stock inner bearings are a mere 20x27x4mm. The oversized bearings we use are gigantic 20x32x7mm bearings! That’s 5mm larger on the diameter and 3mm on the width! That equates to a dynamic load rating that is nearly 300% higher than the stock bearing while the static load rating is over 300% higher! The differences are so dramatic you’ll wonder why these didn’t come stock. If you’ve ever blown a stock rear bearing or broken a stock rear axle carrier, you need to check these out! Our Oversized Rear Axle Carriers are molded in black and backed by our limited lifetime warranty against breakage. You can’t go wrong with RPM parts on your X-Maxx. Tech Notes: RPM Oversized Rear Axle Carriers replace stock Traxxas #7752. Each package is sold as a pair (one left and one right) and includes two inner oversized bearings (one for each side). Outer bearings are stock Traxxas bearings TRX 5106 or TRX 5106A and are not included in this kit.

269,-

299,-

-10%

Hovedbilde Yeah Racing TRX4-045BK Alloy Front Axle Housing ...

Yeah Racing TRX4-045BK Alloy Front Axle Housing ...

Yeah Racing Traxxas TRX-4 Alloy Front Axle Housing (Black) (Titanium Coated) This Yeah Racing Front Axle Housing is an optional accessory for the Traxxas TRX-4 front axle. It features a cast/machined finish, with an additional Titanium coating for even more durability. High shine silver edges add that extra bling, while original TRX4 diff covers fit no problem. This package does not include the axle internals or diff cover, and will require those parts to finalize assembly. Front Axle Housing Weight: 115g

399,-