Traxxas

HPI Racing 107905 Upper Arm Set WR8 Flux

Art.nr: 107905

59,-

Hpi Racing

Hpi Racing

På lager: 7

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is the Upper Arm Set for the HPI WR8 Flux Rally Car from HPI.

FEATURES

Plastic construction
Connects upper section of wheel hubs to bulkheads

INCLUDES

Two Upper Suspension Arms

Produsent

Hpi Racing

Hpi Racing

Kunder kjøpte også

Hovedbilde HPI Racing 107900 Rear Suspension Arm Set

HPI Racing 107900 Rear Suspension Arm Set

This is the Rear Suspension Set For the HPI Racing WR8 1/8 Rally Cars FEATURES Made of black plastic INCLUDES Two suspension arms Two plates SPECIFICATIONS Arm, length: 73mm (2-7/8") width: 13mm (1/2") height: 43mm (1-3/4") Plate, length: 56mm (2-1/4") width: 38mm (1-1/2") thickness: 2.7mm (3/32") COMMENTS This part can be installed on HPI Racing 1/8 Ken Block WR8 Flux Ford Fiesta H.F.H.V. HPI Racing 1/8 WR8 Flux w/Ford Fiesta Abu Dhabi WRC HPI Racing 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

169,-

Hovedbilde HPI Racing 101214 Steering Crank Set

HPI Racing 101214 Steering Crank Set

This is the Steering Crank Set for the HPI WR8 3.0 Glow Powered Rally Car, and the Glow Powered Bullet ST and MT. FEATURES Plastic construction INCLUDES Left and Right Bellcrank, Linkage Arm, four Bushings and two Inserts COMMENTS Only for the glow powered vehicles listed above

119,-

129,-

-8%

Hovedbilde HPI A133 - BALL 5.8x6mm (4pcs)

HPI A133 - BALL 5.8x6mm (4pcs)

A133 - BALL 5.8x6mm (4pcs) THIS PART FITS THE FOLLOWING KITS / PARTS: Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux SWAY BAR SET (FRONT/REAR/SAVAGE X) NITRO RS4 MT 2 Nitro MT2 G3.0 Nitro MT 2 18S NITRO RS4 MT 2 18SS+ KIT WITH DIRT Hellfire RTR Hellfire SS Super 5SC Flux WR8 3.0 Ford Fiesta Abu Dhabi Bullet ST 3.0 w/ 2.4GHz Bullet MT 3.0 w/ 2.4GHz RTR Bullet ST Flux W/ 2.4GHz Bullet MT Flux w/ 2.4GHz WR8 Flux Rally Savage XS SS Ken Block WR8 with Ford Fiesta H.F Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux Ken Block 2013 GRC WR8 Flux KEN BLOCK 2013 GRC WR8 3.0 WR8 FLUX KEN BLOCK 2014 FORD FIESTA WR8 3.0 KEN BLOCK FORD FIESTA ST WR8 Flux Ken Block 2015 Ford Fiesta WR8 3.0 Ken Block 2015 Ford Fiesta VENTURE TOYOTA FJ CRUISER GREY COMPLETE SHOCK SET (4 SHOCKS) VENTURE TOYOTA FJ CRUISER VENTURE Scale Builder Kit VENTURE TOYOTA FJ CRUISER MATTE WR8 FLUX KEN BLOCK GYMKHANA FORD WR8 3.0 KEN BLOCK GYMKHANA FORD Super Nitro Rally RS4 MT Nitro MT NITRO RUSH EVO Nitro Rush Optional part used in the following models: Cyber 10B RTR CRAWLER KING WITH JEEP WRANGLER RTR CRAWLER KING WITH LAND ROVER RTR WHEELY KING TRUCK / BOUNTY RTR WHEELY KING TRUCK / BOUNTY Wheely King 4x4 RTR WHEELY KING TRUCK with MINI Wheely King Wheely King 4x4 RTR WHEELY KING 4X4 TRUCK with MINI

59,-

Hovedbilde Traxxas 5040 Oil Differential 20m Weight

Traxxas 5040 Oil Differential 20m Weight

Oil Differential 20m Weight

179,-

Hovedbilde Traxxas 1834A Body Clips Standard Black (12)

Traxxas 1834A Body Clips Standard Black (12)

Body Clips Standard Black (12)

29,-

39,-

-26%

Hovedbilde Traxxas 3934 Body Clips (12)

Traxxas 3934 Body Clips (12)

Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction Natural polished color INCLUDES: Twelve Body Clips SPECS: Length: 26mm

39,-

Hovedbilde Tamiya 54753 CVA SUPER MINI SHOCK UNIT SET TT-02 (4)

Tamiya 54753 CVA SUPER MINI SHOCK UNIT SET TT-02 (4)

This plastic shock set includes 4 CVA oil-filled dampers and medium black springs. The short black springs are denoted with a yellow paint mark to denote its medium spring rate for easy identification. When fitted onto any of Tamiya’s TT-01 or TT-02 chassis machines, they will improve stability and help the car hold uneven surfaces. This set is ideal for beginners or first-time upgraders! Contains parts to make 4 CVA Super Mini oil shock dampers. Includes 4 black (medium) springs denoted with a yellow paint mark.

279,-

319,-

-13%

Hovedbilde Hpi Racing 107970 WR8 Rally Off-Road Wheel Black ...

Hpi Racing 107970 WR8 Rally Off-Road Wheel Black ...

WR8/Use with 1.9"(48mm) tires Customise the look of your WR8 with the WR8 Rally Off-Road wheel! Styled to look just like the wheels used at WRC events and in rallies around the world, you can choose from a range of colours to get the perfect look for your ride. #107970 WR8 RALLY OFF-ROAD WHEEL BLACK (48x33mm/2pcs) #107971 WR8 RALLY OFF-ROAD WHEEL BRONZE (48x33mm/2pcs) Note: the above wheels fit the off-road WR8 tyres, such as 107870)

119,-

Hovedbilde Hpi Racing 107870 WR8 Rally Off Road Tire (2pcs)

Hpi Racing 107870 WR8 Rally Off Road Tire (2pcs)

WR8/Use with 1.9"(48mm) wheels Modelled on the actual tires used in the WRC and at off-road rally events around the world, these tires are designed to get past the loose soil on top and dig into the firmer dirt underneath, giving you fantastic traction in just about every off-road situation. With a softer compound than the standard tire, plus excellent corner capabilities and fantastic self-cleaning properties for perfect mud-shedding performance, you'll get supreme cornering power as well as powerful acceleration and braking! Fit this tire onto any of our WR8 rally off-road wheels for the ultimate in realistic scale looks! #107881 WR8 RALLY OFF-ROAD WHEEL 48x33mm (WHITE / 2pcs) #107970 WR8 RALLY OFF-ROAD WHEEL BLACK (48x33mm/2pcs) NOTE: These are 1.9” tires and must be fitted on WR8 Off-Road Wheels.

289,-

Hovedbilde Traxxas 2925X 1200mAh Power Cell NiMH Battery

Traxxas 2925X 1200mAh Power Cell NiMH Battery

NB!! Denne her erstatter TRX 2925 Traxxas Series 1 battery packs with iD auto battery identification are standard equipment in Traxxas 1/16-scale models. Like all Traxxas Power Cell packs, Series 1 batteries feature heavy-duty construction, flexible silicone-jacketed wires and Traxxas' high current connector for positive plug-in with zero-loss efficiency. 1200mAh capacity NiMH 6-cell 7.2-volt Series 1 Power Cell battery with iD auto battery identification, replacement battery for 1/16 Traxxas vehicles Genuine iD-equipped Power Cell NiMH battery packs make sure you experience all the performance that's been engineered into your Traxxas model Accessory Traxxas iD Auto Battery Identification chargers (sold separately) detect Traxxas iD Power Cell batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity Type Battery Material NiMH Colour Black Width 7.5 cm Height 16 cm Depth 2 cm Weight 152 g

299,-

319,-

-6%

Hovedbilde HPI Racing 107874 Drive Shaft 56mm WR8 Flux (2)

HPI Racing 107874 Drive Shaft 56mm WR8 Flux (2)

This is the Drive Shaft 56mm For the HPI Racing 1/8 WR8 Rally Car FEATURES Made of steel INCLUDES Two drive shafts SPECIFICATIONS Length, overall: 62mm (2-1/8") Shaft diamter: 3.7mm (1/8") COMMENTS This is a replacement part for HPI Racing 1/8 Ken Block WR8 Flux Ford Fiesta H.F.H.V. HPI Racing 1/8 WR8 Flux w/Ford Fiesta Abu Dhabi WRC HPI Racing 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

159,-

Hovedbilde Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector

Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models New high current connector with gold-plated copper terminals and integrated balance connector iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 12 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High Current Connector and Integrated Balance Plug REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus, LiPo charging bag SPECIFICATIONS Configuration: 3S1P Continuous Discharge: 25C (125A) Max Burst Rate: 50C (250A) Watt Hours: 55.5 Charge Rate: 1C (5A) Max Charge Rate: 2C (10A) Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm) Weight: 13.3oz (376g) COMMENTS ALWAYS use a LiPo-approved Charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.20V per cell NEVER Charge at currents greater than 1C NEVER Trickle Charge NEVER allow to Discharge below 3.2V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging ALWAYS Charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of reach of children

995,-

1.095,-

-9%

Hovedbilde Traxxas 7630 Suspension Arms Front/Rear (2) Teton

Traxxas 7630 Suspension Arms Front/Rear (2) Teton

These are the Front or Rear Suspension Arms for the LaTrax Teton Monster Truck from Traxxas. FEATURES Composite plastic construction Fastens to front or rear bulkheads INCLUDES Two Front or Rear Suspension Arms

69,-

Hovedbilde HPI Racing 101209 Front Hub Carriers Left/Right 10 ...

HPI Racing 101209 Front Hub Carriers Left/Right 10 ...

These are the Front Hub Carriers for the HPI WR8 and Bullet Series. FEATURES: Plastic construction INCLUDES: Left and Right Front Hub Carriers REQUIRES: Four 5x10mm Ball Bearings (11)

99,-

119,-

-17%

Hovedbilde Pro-Line 607002 Body Mount Thumbwasher Kit

Pro-Line 607002 Body Mount Thumbwasher Kit

This is the Pro-Line Body Mount Thumbwasher Kit. FEATURES: For the #6070-00 , #6071-00 , #6087-00 Pro-Line Body Mount Kits INCLUDES: Four each Thumbwashers, 4x12mm Set Screws, and O-Rings

159,-

Hovedbilde Traxxas 1654 Wheel Hubs (2)

Traxxas 1654 Wheel Hubs (2)

Wheel hubs, hex (2)/ stub axle pins (4)

35,-

Hovedbilde Traxxas 3956R Spur 32P 54T Spur Slash 4x4

Traxxas 3956R Spur 32P 54T Spur Slash 4x4

This is the 54 Tooth Spur Gear for the Traxxas Slash 4x4 Center Differential. FEATURES: Nylon construction 0.8 metric pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Installing in center differential

39,-

Hovedbilde Traxxas 1834 Body Clips (12)

Traxxas 1834 Body Clips (12)

Disse passer Traxxas 1/16 biler. These are Replacement Traxxas Body Clips. They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS: Length: aprrox. 7/8"

25,-

35,-

-29%

Hovedbilde Kyosho E025 E-Clips (E2.5/10pcs)

Kyosho E025 E-Clips (E2.5/10pcs)

E-Clips (E2.5/10pcs)

35,-

Hovedbilde Absima 2440018 Body Clips Small/Blue (10 Pcs)

Absima 2440018 Body Clips Small/Blue (10 Pcs)

Body Clips Small/Blue (10 Pcs)

57,-

Hovedbilde HPI Racing 107902 Front Bumper Set WR8 Flux

HPI Racing 107902 Front Bumper Set WR8 Flux

This is the Front Bumper Set FEATURES Made of black plastic INCLUDES Two different pieces SPECIFICATIONS Longer piece, length: 2-11/16" (65mm) width: 4-5/8" (117mm) height: 5/8" (16mm) Shorter piece, length: 2" (51mm) width: 4-1/2" (114mm) height: 1-3/8" (35mm)

119,-

Hovedbilde HPI Racing 107904 Rear Body Mount WR8 Flux

HPI Racing 107904 Rear Body Mount WR8 Flux

This is the Rear Body Mount for the HPI WR8 Flux Rally Car from HPI. FEATURES Plastic construction Installs at rear of chassis and holds rear body posts in place INCLUDES Rear Body Mount

59,-