Hopp til innhold

Traxxas Aton

Populært i denne kategorien

 
Art.nr: TRX 3229
Copied
These are the stock replacement 2.5x10mm socket head screws used to attach the cylinder head to the Traxxas Image engine. Features: strong steel design Specifications: 2.5x10mm sockethead screw Includes: Six 2.5x10mm sockethead screws

35,-

KJØP
Art.nr: TRX 6640X
Copied
Traxxas 6640X Gimbal Sticks Transmitter (Thumb Pads)

49,-

KJØP
Art.nr: TRX 7911
Copied
This is the Front Canopy in Red and White for the Traxxas Aton Quadcopter.     FEATURES Fits the Traxxas Aton and Aton Plus  Molded plastic construction, red and white in color   INCLUDES Front Canopy in Red and White  Two 2.5x8mm Mounting Screws   SPECIFICATIONS  Length: 7.8" (198mm)  Width: 3.4" (86mm) at widest point

119,-

KJØP
Art.nr: trx 7912
Copied
This is the Front Canopy in Blue and White for the Traxxas Aton Quadcopter.     FEATURES Fits the Traxxas Aton and Aton Plus  Molded plastic construction, blue and white in color   INCLUDES Front Canopy in Blue and White  Two 2.5x8mm Mounting Screws   SPECIFICATIONS  Length: 7.8" (198mm)  Width: 3.4" (86mm) at widest point

119,-

KJØP
Art.nr: TRX 7913
Copied
This is the Front Canopy in Black and White for the Traxxas Aton Quadcopter.     FEATURES Fits the Traxxas Aton and Aton Plus  Molded plastic construction, black and white in color   INCLUDES Front Canopy in Black and White  Two 2.5x8mm Mounting Screws   SPECIFICATIONS  Length: 7.8" (198mm)  Width: 3.4" (86mm) at widest point

119,-

KJØP
Art.nr: TRX 7914
Copied
This is the Front Canopy in Grenn and White for the Traxxas Aton Quadcopter.     FEATURES Fits the Traxxas Aton and Aton Plus  Molded plastic construction, grenn and white in color   INCLUDES Front Canopy in Grenn and White  Two 2.5x8mm Mounting Screws   SPECIFICATIONS  Length: 7.8" (198mm)  Width: 3.4" (86mm) at widest point

119,-

KJØP
Art.nr: TRX 7916
Copied
This is the Rear Canopy in Black for the Traxxas Aton Quadcopter.     FEATURES Fits the Traxxas Aton and Aton Plus  One-piece molded plastic construction   INCLUDES Rear Canopy in Black  Two 2.6x8mm Button Head Cap Screws   SPECIFICATIONS  Length: 2.9" (73mm)  Width: 3.6" (91mm) at widest point

59,-

KJØP
Art.nr: TRX 7918
Copied
This is the Roll Hoop Canopy for the Traxxas Aton and Aton Plus Quadcopters.     FEATURES One-piece plastic construction, red in color   INCLUDES Roll Hoop Canopy  Four 2x7mm Mounting Screws   SPECIFICATIONS  Width: 3.8" (97mm)  Height: 3.2" (81mm)

69,-

KJØP
Art.nr: TRX 7919
Copied
This is the Roll Hoop Canopy for the Traxxas Aton and Aton Plus Quadcopters.     FEATURES One-piece plastic construction, blue in color   INCLUDES Roll Hoop Canopy  Four 2x7mm Mounting Screws   SPECIFICATIONS  Width: 3.8" (97mm)  Height: 3.2" (81mm)

59,-

KJØP
Art.nr: trx 7920
Copied
Canopy roll hoop Orange for Aton

69,-

KJØP
Art.nr: TRX 7921
Copied
This is the Roll Hoop Canopy for the Traxxas Aton and Aton Plus Quadcopters.     FEATURES One-piece plastic construction, green in color   INCLUDES Roll Hoop Canopy  Four 2x7mm Mounting Screws   SPECIFICATIONS  Width: 3.8" (97mm)  Height: 3.2" (81mm)

69,-

KJØP
Art.nr: TRX 7922
Copied
Canopy, roll hoop, white

69,-

KJØP
Art.nr: TRX 7923
Copied
This is the Main Frame in Black for the Traxxas Aton Quadcopter.     FEATURES Fits the Traxxas Aton and Aton Plus  One-piece molded plastic construction, center section with four  booms and motor cradles   INCLUDES Main Frame in Black   SPECIFICATIONS  Center Diagonal Distance: 14.57" (370mm)  Vertical Distance: 10.30" (262mm)

209,-

KJØP
Art.nr: TRX 7924
Copied
This is the Lower Main Frame in Black for the Traxxas Aton Quadcopter.     FEATURES Fits the Traxxas Aton and Aton Plus  One-piece molded plastic construction  Fasten to bottom of main frame and holds circuit boards in place   INCLUDES Lower Main Frame in Black

119,-

KJØP
Art.nr: TRX 7925
Copied
  Main frame upper, Black, Aton

59,-

KJØP
Art.nr: TRX 7927
Copied
This is the Rotor Blade Set in White for the Traxxas Aton Quadcopter.     FEATURES Fits the Traxxas Aton and Aton Plus  Stamped "A" and "B" to ensure correct installation  Molded plastic construction   INCLUDES One each; Clockwise Rotating "A" Stamped Propeller  Counterclockwise Rotating "B" Stamped Propeller

59,-

KJØP
Art.nr: TRX 7928
Copied
Rotor blade set, red (2) (with screws)

59,-

KJØP
Art.nr: TRX 7929
Copied
This is the Rotor Blade Set in Blue for the Traxxas Aton Quadcopter.     FEATURES Fits the Traxxas Aton and Aton Plus  Stamped "A" and "B" to ensure correct installation  Molded plastic construction   INCLUDES One each; Clockwise Rotating "A" Stamped Propeller  Counterclockwise Rotating "B" Stamped Propeller

59,-

KJØP
Art.nr: TRX 7930
Copied
Rotor blade set, orange (2) (with screws)

59,-

KJØP
Art.nr: TRX 7931
Copied
This is the Rotor Blade Set in Green for the Traxxas Aton Quadcopter.     FEATURES Fits the Traxxas Aton and Aton Plus  Stamped "A" and "B" to ensure correct installation  Molded plastic construction   INCLUDES One each; Clockwise Rotating "A" Stamped Propeller  Counterclockwise Rotating "B" Stamped Propeller

59,-

KJØP
Art.nr: TRX 7934
Copied
  Motor brushless, Aton

495,-

KJØP
Art.nr: TRX 7943
Copied
This is a quantity of six 2.6x8mm Screws for the Traxxas Aton Quadcopter.     FEATURES Steel construction, black in color  Used in the assembly of the Traxxas Aton  May also be used in any application a screw this size is required   INCLUDES Six 2.6x8mm Screws   REQUIREMENTS 2mm Hex Wrench

25,-

KJØP
Art.nr: TRX 7944
Copied
This is a quantity of six 2.6x5mm Screws for the Traxxas Aton Quadcopter.     FEATURES Steel construction, black in color  Used on the Aton to attach circuit board to main frame  May also be used in any application a screw this size is required   INCLUDES Six 2.6x5mm Screws   REQUIREMENTS 2mm Hex Wrench

19,-

KJØP
Art.nr: TRX 7947
Copied
This is the Front LED Light Harness for the Traxxas Aton and Aton Plus. FEATURES Installs in LED lens on the front motor boom* Two lights on end and one in the center of lens INCLUDES Three Front LED Lights with Wire Leads and Connector COMMENTS *Two Light Harnesses are required per front and rear

99,-

KJØP
Art.nr: trx 7948
Copied
LED-light harness rear, Aton

99,-

KJØP
Viser 1 til 25 (av 42 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png