Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Børsteløs regulator

Børsteløs regulator

Populært i denne kategorien

Hovedbilde Børsteløs bil regulator

Børsteløs bil regulator
Hovedbilde Børsteløs båt regulator

Børsteløs båt regulator
Hovedbilde Børsteløs drone regulator

Børsteløs drone regulator
Hovedbilde Børsteløs fly regulator

Børsteløs fly regulator
Hovedbilde Hovedbilde
"BULK" BSD Brushless ESC 50A WP-10BL50-RTR Waterproof ...
Art.nr: BULK WP-10BL50-RTR
Copied
Brushless ESC 50A WP-10BL50-RTR Waterproof 2-3S for RC Car *** This is a Brand new item taken from a kit (chopped part), therefore will not have a BSD packaging *** Product Description WP10-BL50 Brushless 50A Sport ESC for RC Car or Truck with DEANS T-Plug connector Hobbywings latest series of waterproof brushless Speed Controller series and is the 50A (300A) sensorless version fitted with a Deans T-Plug battery connector. Features: Water-proof and dust-proof for all-weather races. (Note: please remove the cooling fan before using this ESC in water; clean and dry it soon after the use for avoiding the connectors get rusty.) External programming port, easy to connect to the Program Card when setting the ESC. Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment. 9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit for different kinds of models, tires and tracks. Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection. One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings. Compatible with the optional device "HW-LED-PC2C" the portable Digital LED Program Box, especially convenient for outdoor use. Programmable Items 1. Run Mode: Forward/Brake - Forward/Reverse/Brake - Forward/Reverse. 2. Drag Brake Force:  0%, 5%, 10%, 20%, 40%, 60%, 80%, 100% 3. Low Voltage Cut off: Disabled, 2.6V/Cell, 2.8V/Cell, 3.0V/Cell, 3.2V/Cell, 3.4V/Cell 4. Start Mode (Punch):  9 levels (default is 5) 5. Max Brake Force:  25%, 50%, 75%, 100%, Disabled 6. Max. Reverse Force:  25%, 50%, 75%, 100% 7. Initial Brake Force:  (=drag force), 0%, 20%, 40% 8. Throttle Range:  6%, 9%, 12% 9. Timing: 0.00°, 3.75°, 7.50°, 11.25°, 15.0°, 18.75°, 22.5°, 26.25° Specifications Current - 50A Continuous - 300A Peak Input - 4-9 Cells NiMh, or 2-3S Lipo BEC Output - 6V/3A (Switch Mode) Resistance - 0.0010 Ohm Motor Supported - Sensorless Brushless Motor (compatible with sensored motor but not in sensored operating mode) Cooling Fan - Gets working voltage from battery directly without regulating, the stock fan can work with 2S and 3S Lipo. Size - 48.5(L)X38(W)X32(H)mm Weight - 90g Motor Limit - For 2S Lipo or 6 cells NiMH     On-road: 3650-size or smaller motor with a KV <6000     Off-road/Buggy/Monster: 3650-size or smaller motor with the KV<4000 Motor Limit - For 3S Lipo or 9 cells NiMH:     On-road: 3650-size or smaller motor with a KV<4000     Off-road/Buggy/Monster: 3650-size or smaller motor with a KV<3000 HSP Models Applicable - 1:10 On-road/Off-road/Buggy/Monster Truck/ SCT Motor connectors: 4mm female bullet. Battery connector: T-Plug (Deans) fitted.

799,-

849,-

KJØP
-6%
Hovedbilde
"Bulk" Tamiya 45069 RC BRUSHLESS ESC TBLE-04S
Art.nr: BULK 45069
Copied
TAMIYA 45069 RC BRUSHLESS ESC 04S This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over. High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected. Setup is shown by an LED, and the ESC also features two protection functions. Maximum continuous current: 75A Input voltage: 6.6V - 7.2V Dimensions: 41.5mm x 33.4mm x 18mm Weight: 45g (including cables) • Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response. • Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over. • Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it. • Features overheating and overload protection functions to help ensure that your equipment avoids damage. • Weight: 47g (including cables) • Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs. • Dimensions: 41.5 x 33.4 x 18mm LO/HI Battery Cut-off Information: LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries) SPECIFICATIONS Electronic Speed Control (esc)  Maximum continuous current: 75A Input voltage: 6.6V - 7.2V Dimensions: 41.5mm x 33.4mm x 18mm Weight: 45g (including cables) Special Feature 1 LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)

649,-

799,-

KJØP
-19%
Hovedbilde Hovedbilde
"BULK"Traxxas 3375 VXL-3m Waterproof Electronic Speed ...
Art.nr: BULK TRX 3375
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** Ny men leveres uten embalasje. This is the Velineon VXL3m Electronic Speed Control from Traxxas. FEATURES: Brushless control           11.1V 3S LiPo battery capability           Low voltage detection           2 stage thermal protection           Waterproof           Multi-color LED           EZ-Set push button setup INCLUDES: One VXL3m Electronic Speed Control REQUIRES: Installation on the vehicle SPECS:    Input Voltage: 6 to 12 cell NiMH, 2S to 3S LiPo           Motors: Sensorless Brushless           Motor Limit: None           Continuous Current: 52A           Peak Current: 326A           BEC Voltage: 6.0V DC           Transistor Type: MOSFET           On-Resistance: 0.0005 ohms           PWM Frequency: 12,000Hz           Motor Connectors: Traxxas 3.5mm bullet connectors           Motor/Battery Wiring: 16-Gauge           Thermal Protection: Two-Stage Thermal Shutdown           Weight: 38g (1.34oz) REQUIRES: Installation on the vehicle SPECS:    Input Voltage: 6 to 12 cell NiMH, 2S to 3S LiPo           Motors: Sensorless Brushless           Motor Limit: None           Continuous Current: 52A           Peak Current: 326A           BEC Voltage: 6.0V DC           Transistor Type: MOSFET           On-Resistance: 0.0005 ohms           PWM Frequency: 12,000Hz           Motor Connectors: Traxxas 3.5mm bullet connectors           Motor/Battery Wiring: 16-Gauge           Thermal Protection: Two-Stage Thermal Shutdown           Weight: 38g (1.34oz)

1.295,-

1.595,-

KJØP
-19%
Hovedbilde BSD 205-035 BRUSHLESS ESC 60A WATER PROOF FOR ESC
BSD 205-035 BRUSHLESS ESC 60A WATER PROOF FOR ESC
Art.nr: 205-035
Copied
Tilpasset Ramasoon fra BSD Tåler 2-3 celler lipo 60A Deans kobling 4mm Bullet til motor Splash proof   Brand: Hobbywing   Model: EZRUN-S10 RTR     Continuous Current: 60A     Instantaneous Current: 380A     BEC Output: 6V/1.5A     Internal Resistance: 0.00075     Type: Sensorless     Size: 31.5 x 27.5 x 24 mm     Weight: 89 g

1.199,-

1.299,-

KJØP
-8%
Hovedbilde BSD 7003-R Brushless ESC 35A-SL Tamiya Connector
BSD 7003-R Brushless ESC 35A-SL Tamiya Connector
Art.nr: 7003-R
Copied
Brushless ESC for bil, sensorless. Tamiya Connector EZRUN-35A: Constant 35A – Bust 190A Input: 4-9 cells NiMH/NiCd or 2-3S LiPo. BEC: 6V/1.5A (Linear mode built-in BEC). Resistance: 0.0015 Ohm Suitable Motor With 4-6 cells NiMH/NiCd or 2S Lipo: On-Road=9T, Off-Road=12T;With 6-9 cells NiMH/NiCd or 3S Lipo: On-Road=12T, Off-Road=18T Size: 31.5mm(L) * 27.5mm(W) * 24mm(H). Weight: 30g (Without wires)

799,-

849,-

KJØP
-6%
Hovedbilde BSD 701-047 Water Proof Brushless ESC 45A Deans ...
BSD 701-047 Water Proof Brushless ESC 45A Deans ...
Art.nr: 701-047
Copied
 Water Proof Brushless ESC 45A Deans Connector

799,-

KJØP
Hovedbilde BSD 7055W Brushless ESC 80A Water Proof
BSD 7055W Brushless ESC 80A Water Proof
Art.nr: 7055W
Copied
1  Specification 1.1 Output: Continuous 80A 1.2 Input: 6-12 cells NiMH/NiCd or 2-4S Lipo; 1.3 BEC Output: * Note #1  6V/3A (Switching mode); 1.4 Resistance: 0.0004 Ohm; 1.5 Motor Supported: Sensorless Brushless Motor; 1.6 Suitable Brushless Motor: With 6 cells NiMH/NiCd or 2S Lipo: KV=6000; With 7-9 cells NiMH/NiCd or 3S Lipo: KV=4000; With 10-12 cells NiMH/NiCd or 4S Lipo: KV=3000; 1.7 Suitable Car: 1/10 4WD SCT, 1/8 2WD and 4WD buggy/SCT (Include TRAXXAS 1/10 SCT); 1.8 Size: 59mm(L) * 38mm(W) * 34mm(H); 1.9 Weight: 113g;* Note #1: The cooling fan of EZRUN-WP-SC8 is powered by the built-in BEC. 2  Features  2.1 Completely water-proof and dust-proof. 2.2 Powerful built-in switching mode BEC. 2.3 Excellent start-up, acceleration and linearity features. 2.4 Plenty of programmable items, suitable for various of chassis’s, tires and racing.

1.195,-

1.295,-

KJØP
-8%
Hovedbilde Castle Creation 010013910Sidewinder 8TH ESC 25,2V 8A ...
Castle Creation 010013910Sidewinder 8TH ESC 25,2V 8A ...
Art.nr: 010-0139-10
Copied
Sidewinder 8th is our sport 1:8 scale waterproof* ESC that we have paired with the 1515B-2200Kv  - until now! It’s perfect for entry level, weekend basher, or serious road warriors seeking the benefits of an affordable brushless upgrade.Capable of 2-6S LiPo, with an 8 amp peak BEC the Sidewinder 8 is the perfect upgrade for 1:8 scale buggies, truggies and on-road vehicles as well as 1:10 scale monster trucks weighing up to 11 lbs. It can also work as a great upgrade for some 4WD short course trucks for 3s or 4s operation.   Waterproof : Yes Telemetry Capable : No Data Logging : No Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 6S Sensored Capable : No Recon G6 Certified ESC : No ROAR Certified ESC : No Features: 2s - 6s LiPo (25.2V) use in vehicles up 5Kg with battery, ready-to-run. Sensorless motor operation. Large 6.5mm female motor bullet connectors (male connectors sold separately) Waterproof design ESC and splash resistant 30MM fan Powerful 5.5 volts fixed, 8 amps Peak BEC LED error codes for common error conditions Smooth sensorless startups Convenient transmitter programming for nine common adjustable settings Full compatible with the Castle Link Programming Suite to modify settings and download software updates available via Windows®-based Castle Link software and USB adapter (purchased separately), Field Link Card (sold separately), or the Castle Link iOS App and a B-Link Bluetooth Adapter. (sold separately) Specifications: Input Voltage: MIN: 2S Li-Po; MAX 6S Li-Po BEC: 5,5Volt fixed, 8A Peak Brake: Proportional Reverse: Yes (may be disabled for racing) On/Off Swith: No Cooling Fan: Yes (30mm) Size: L:62,2mm B:56mm H:34mm Weight: 100gram Connectors: 6,5mm female bullets for motor: Battery connector required Castle Link Compatible With the optional Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include: Throttle curve Braking curve Drag brake Auto LiPo cutoff Punch Control Reverse Type Motor Type Additional Castle Link benefits include: Access to all firmware updates, including added features sets released from Castle Engineering, at no charge. Intuitive Demo Mode capability. Ability to save setup profiles for later use.

1.690,-

KJØP
Hovedbilde Castle Creation 010016500 Mamba Monster X 8S 33,6V ESC Hovedbilde Castle Creation 010016500 Mamba Monster X 8S 33,6V ESC
Castle Creation 010016500 Mamba Monster X 8S 33,6V ESC
Art.nr: 010-0165-00
Copied
Castle Mamba Monster-X-8S, 33.6V ESC MORE POWER - COOLER TEMPS - LONGER RUNS Take your 1:6th scale build or upgrade to the next level with Castle’s legendary brushless power. With the introduction of the MAMBA MONSTER X 8S any R/C vehicle weighing up to 25lbs, and running up to 8S LiPo, is fair game. Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : Yes Minimum Input Voltage : 2S Maximum Input Voltage : 8S Sensored Capable : Yes Recon G6 Certified ESC : No ROAR Certified ESC : No CRYO-DRIVE : Yes Specs: Applications: 1:6th Scale vehicles weighing up to 11kg Input Voltage Range: MIN: 2S LiPo, MAX: 8S LiPo 33.6V Running Modes: Sensored, Sensorless and SmartSense™ when paired with a Castle 4-POLE 12-SLOT Sensored Motor. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (40mm), fully removable** (see Product Use Statements below) Size (LxWxH): 69.5x54.1x47mm Weight (with wires): 163gr Connectors type: 6.5mm female bullets for motor connection Items Needed for Operation: A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads. Operating environment: Waterproof design for all weather conditions Programmability: Fully programmable Castle feature set using Castle Link USB adapter(coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters. Product Use Statements: Recommended battery capacity for 1:6th scale vehicles is 5000mah. We recommend using 50C continuous discharge or higher LiPo batteries. Surge ratings should never be used to determine a pack’s suitability for a brushless application. We recommend a high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors. Applying voltages higher than 33.6V will cause irreparable damage to ESC; DO NOT RUN HV CELLS (above 4.2v/cell) WHEN RUNNING AT MAX CELL COUNT (8s). This will exceed the 33.6v rating and will damage the ESC and not be covered by the warranty. Although Mamba Monster X 8S is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt. The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.

3.295,-

3.595,-

KJØP
-8%
Hovedbilde Castle Creation Copperhead 10 16,8V Sensored ESC Hovedbilde Castle Creation Copperhead 10 16,8V Sensored ESC
Castle Creation Copperhead 10 16,8V Sensored ESC
Art.nr: 010-0166-00
Copied
Castle COPPERHEAD 10, 16.8V, WP SENSORED ESC COPPERHEAD 10 FEATURES: Input Voltage Range : 2s-4s LiPo (ESC Only) SMARTSENSE™, SENSORED ONLY and BRUSHED Running Modes Selectable 5.5V or 7.5V (6A peak) internal BEC (Battery Eliminator Circuit) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs. ESC is housed in a durable injection molded case and potted in WATERPROOF epoxy to protect the electronics and promote efficient heat transfer. 30mm removable fan and DUAL USE FAN GUARD Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. Convenient TRANSMITTER PROGRAMMING for six common adjustable settings inlcuding cutoff voltage and drag brake. DATA LOGGING LITE* captures and records performance data from your vehicle to maximize performance and battery life. (Battery Voltage Battery Ripple, Controller temp, Motor RPM, Motor Temp) SMARTSENSE™ uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode. CASTLE LINK USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ BLUETOOTH ADAPTER (sold separately) and Castle Link App available on Google Play or Apple App Store THERE'S A NEW PREDATOR IN TOWN. Meet the COPPERHEAD 10 PERFORMANCE ESC. It takes to the open road as well as it takes to no road at all. This completely new design rounds out our 1:10 scale offerings, positioned between the SIDEWINDER 4 as the entry-level upgrade and the MAMBA X as the extreme performance option. The COPPERHEAD 10 includes CRYO-DRIVE™ TECHNOLOGY, SENSORED MOTOR SUPPORT and DATA LOGGING LITE* with Castle’s signature reliability and performance. Throughout its development the Copperhead has been put to the test in all types of elements and performed as aggressively, or as stealthy, as desired. Whether on the trail dominating the gates or throwing dust on the dirt track, the Copperhead is power hungry when you need it and oozes smooth low-end power for technical low RPM performance. If your rig is outfitted with high-power servos (or additional torque increasing modifications) there is no need to worry about brown-outs, glitching or slow actuating servos. The Copperhead provides clean and constant power with its user selectable (through Castle Link) 5.5V or 7.5V (6A peak) internal BEC. The ESC can be installed and calibrated (plug and play) and provide immediate fuss-free wheel time. Through the interface-free manual programming mode, using your transmitter you can set your low-voltage cutoff, brake/reverse type, brake amount, drag brake, motor type and direction. Likewise, you can employ the use of the Castle Link Programming Suite on your Windows™ PC (coupon for free USB adapter included with purchase), or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. Additional Castle Link benefits include access to all firmware updates and added features sets released from Castle Engineering (at no charge), the ability to download and analyze your collected Data Log , an Intuitive Demo Mode capability as well as the option to save setup profiles (for multiple vehicles) for later use. For crawler setups or others that do not require an ESC cooling fan, the fan is easily removed with four screws and the fan guard with the cool COPPERHEAD logo simply clicks back into place on the top of the ESC. It keeps the COPPERHEAD 10 looking mean and provides an extra measure of protection. To further protect your investment, the COPPERHEAD emits audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. You'll find a handy decal in your box that contains a reference chart for the eight alert tones, no need to Google while your enjoying your wheel time! We’ve packaged the COPPERHEAD 10 with a dozen different 4-POLE 12-SLOT sensored motor options to eliminate the guesswork in finding the right brushless power upgrade for your basher, crawler, on road vehicle, short course or monster truck. An added bonus of pairing your Copperhead with a Castle 4-Pole 12-Slot sensored motor is enabling SMARTSENSE™ TECHNOLOGY, which uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode with electronic timing to advance timing automatically for peak performance in all driving conditions. The all-new COPPERHEAD 10 PERFORMANCE 1/10 SCALE ESC is ideal for those who want sensored motor support, data logging, a 6A peak selectable internal BEC (5.5V or 7.5V) and Castle’s signature reliability and performance in the meanest looking ESC around! If you’re looking to transform your 1:10 scale stock vehicle from dull to dangerously fun COPPERHEAD can do it with its buttery smooth starts, CRYO-DRIVE enabled performance and up to 4S power in a compact, easy-to-install footprint. Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 4S Sensored Capable : Yes Recon G6 Certified ESC : No ROAR Certified ESC : No CRYO-DRIVE : Yes COPPERHEAD 10 ESC COMES WITH: Copperhead 10 ESC with sensor harness Copperhead decals and Audible Alert Reference Chart Coupon for free Castle Link USB Copperhead Quick Start Guide Sensor port dust cover Copperhead 10 ESC Specs: Application Guidelines: 1/10 scale vehicles weighing up to 3.4kg Input Voltage Range: 2s-4s (16.8V Max) Running Modes: SMARTSENSE™, Sensored Only and Brushed Motor Operation Brake: Proportional Reversible: Yes, but may be disabled for racing On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (30mm), fully removable** and includes dual use fan guard (See Operating Use Statements) Size: 55.6 x 35.3 x 33.8mm Weight (with wires): 70.9 g Motor Connectors: 4.0mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or T-Plugs or XT60 connectors are recommended Operating environment: Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters.

1.995,-

2.295,-

KJØP
-13%
Hovedbilde Castle Creation MAMBA Micro X2, 16,8V WP Sensored ESC, ... Hovedbilde Castle Creation MAMBA Micro X2, 16,8V WP Sensored ESC, ...
Castle Creation MAMBA Micro X2, 16,8V WP Sensored ESC, ...
Art.nr: CC 010-0169-00
Copied
Castle Creation MAMBA Micro X2, 16,8V WP Sensored ESC, 3,5 Putting the X in Extreme! The Mamba Micro X2 is a refresh of our popular 1:18 scale Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle.  Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT. This is the perfect upgrade for 1:18th scale 2WD or 4WD vehicles up to 2.25 lbs. The Mamba Micro X also works well in some 1:10th scale crawlers for low speed operation (no rock racing/hill climbing). You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors. FEATURES: Input Voltage range 2S-4S Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V Waterproof design. Sensored Motor capable (with optional sensor harness) Convenient transmitter programming for six common adjustable settings. Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters) Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake. Audible Alerts that will notify you of possible issues with calibrations and error conditions. Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty. Mamba Micro X2  ESC Purchase Includes: Mamba Micro X2 ESC with 3.5mm connectors Coupon for free Castle Link USB adapter Quick Start Guide Castle Decals MAMBA MICRO X2, 16.8V, WP SENSORED ESC Putting the X in Extreme!   The Mamba Micro X2 is a refresh of our popular 1:18 scale Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle.  Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT. This is the perfect upgrade for 1:18th scale 2WD or 4WD vehicles up to 2.25 lbs. The Mamba Micro X also works well in some 1:10th scale crawlers for low speed operation (no rock racing/hill climbing). You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors. FEATURES: Input Voltage range 2S-4S Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V Waterproof design. Sensored Motor capable (with optional sensor harness) Convenient transmitter programming for six common adjustable settings. Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters) Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake. Audible Alerts that will notify you of possible issues with calibrations and error conditions. Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty. Mamba Micro X2  ESC Purchase Includes: Mamba Micro X2 ESC with 3.5mm connectors Coupon for free Castle Link USB adapter Quick Start Guide Castle Decals *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Technical Specs Input Voltage Range: 2S-4S LiPo (16.8V Max) BEC Specifications: Adjustable; 5.5V or 7.5V (default 5.5V) 2A Peak Operating Environment: Waterproof* design allows for use in nearly any environment Brake: Proportional Reversible: Yes, but may be disabled On/Off Switch: Yes, waterproof Cooling Fan: Not included Size (L x W x H): 41.6 mm x 29.4 mm x 21.3 mm (1.64" x 1.16" x .84") Weight (with wires): 1.66 oz / 47 grams Connectors: 3.5 mm bullets Items Needed for Operation: Battery Connector required: Castle 4.0mm Polarized Connectors, Deans Ultra Plugs and XT60 are recommended. Product Use Statements: Applying voltages higher than 16.8 volts will cause irreparable damage to your controller, voiding your warranty. Minimum recommended battery capacity for 1:18 scale vehicles is 1500mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Mamba Micro X has 3.5mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps. Application Guidelines: 1:18 scale RC hobby vehicles weighing up to 2.25lbs. Recommended Motors: Castle 0808 4100Kv: Max Cells: 3S Lipo or 8 NiMH Castle 0808 5300Kv: Max Cells: 3S Lipo or 8 NiMH Castle 0808 8200Kv: Max Cells: 2S Lipo or 8 NiMH Max. Recommended Vehicle Weight: 2.25 lbs, with batteries, ready-to-run Programmability: Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters. Tech Notes: *Although the Mamba Micro X2 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

1.395,-

1.595,-

KJØP
-13%
Hovedbilde Castle Creations 010011100 PHOENIX EDGE LITE 100 - 25V ...
Castle Creations 010011100 PHOENIX EDGE LITE 100 - 25V ...
Art.nr: 010-0111-00
Copied
Lose the weight, gain the Edge. Put your power system on a diet with the Phoenix Edge Lite series of ESCs. With the same amazing features and functionality of the Edge series, the Edge Lite offers a slight weight reduction for applications that are tight for space or weight. Simply put, the same brawn with less body - Phoenix Edge Lite. With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an “unexpected landing”, act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility.  The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size, and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter.   Technical Specs: Input voltage: MIN: 2S LiPo MAX: 8S LiPo Max continuous amperage at full throttle: 100 amps* BEC voltage (voltage regulator for powering radio and servos): User selectable choice from 5 to 8.4 volt output BEC output amperage: 5 amp peak** Size and Weight: Width: 30.5 mm Length: 66 mm Height: 21.4 mm Weight w/wires: 91.5 g Weight w/o wires: 41 g Miscellaneous: Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software. Castle Field Link Programming Card (sold separately) compatible for select functions. Connectors: Battery and motor connectors sold separately Tools needed for installation: Soldering iron and solder to attach bullets to motor wires and battery connector to power wires. *RC HOBBY APPLICATION RATING: 100 amps with appropriate cooling. Phoenix Edge Lite controllers are designed without a heat-sink for applications with extreme air-flow, such as EDF planes, or applications with average current requirements much less than peak current requirements. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature. **Peak indicates amperage sustainable for 0.5 seconds – long enough for most servos’ current draw transients. Your setup may vary. Always confirm servo current draw before the first flight of the model.

1.899,-

KJØP
Hovedbilde Castle Creations 010011200 PHOENIX EDGE LITE 75 - 25V ...
Castle Creations 010011200 PHOENIX EDGE LITE 75 - 25V ...
Art.nr: 010-0112-00
Copied
Lose the weight, gain the Edge. Put your power system on a diet with the Phoenix Edge Lite series of ESCs. With the same amazing features and functionality of the Edge series, the Edge Lite offers a slight weight reduction for applications that are tight for space or weight. Simply put, the same brawn with less body - Phoenix Edge Lite. With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an “unexpected landing”, act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility.  The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size, and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter.   Technical Specs: Input voltage: MIN: 2S LiPo MAX: 8S LiPo Max continuous amperage at full throttle: 75 amps* BEC voltage (voltage regulator for powering radio and servos): User selectable choice from 5 to 8.4 volt output BEC output amperage: 5 amp peak** Size and Weight: Width: 30.5 mm Length: 66 mm Height: 21.4 mm Weight w/wires: 81 g Weight w/o wires: 41 g Miscellaneous: Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software. Castle Field Link Programming Card (sold separately) compatible for select functions. Connectors: Battery and motor connectors sold separately Tools needed for installation: Soldering iron and solder to attach bullets to motor wires and battery connector to power wires. *RC HOBBY APPLICATION RATING: 75 amps with appropriate cooling. Phoenix Edge Lite controllers are designed without a heat-sink for applications with extreme air-flow, such as EDF planes, or applications with average current requirements much less than peak current requirements. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature. **Peak indicates amperage sustainable for 0.5 seconds – long enough for most servos’ current draw transients. Your setup may vary. Always confirm servo current draw before the first flight of the model.

1.599,-

KJØP
Hovedbilde Castle Creations 1/10 Sidewinder 3 Waterproof ESC
Castle Creations 1/10 Sidewinder 3 Waterproof ESC
Art.nr: 010-0115-00
Copied
This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control. FEATURES: Recommended for all 1/10 scale buggy and truggy applications that             weigh less than 5lbs (2.25kg) ready to run (not for use in heavier             vehicles such as E-Revos or E-Maxx class vehicles)           USB programming capability via Castle Link USB adapter.           Waterproof for use in nearly every environment (not intended for             operation while submerged in liquid)           Compatible with the Castle Creations 14xx series NeuCastle motors           Reversible with reverse lockout INCLUDES: Sidewinder SV3 12V ESC with 13 gauge Motor Wires, 4mm Female Bullet             Motor Connectors, 13 gauge Battery Wires with Pre-Tinned Leads,             Receiver Connector, On/Off Switch, Instructions REQUIRES: Battery connector of modeler's choice SPECS:    Input Voltage: 2S LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH           Brake: Proportional           Reversible: Yes, with lockout           Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)           Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no             battery connector

949,-

1.149,-

KJØP
-17%
Hovedbilde Castle Creations Mamba Monster X Waterproof ESC
Castle Creations Mamba Monster X Waterproof ESC
Art.nr: 010-0145-00
Copied
First, there was the Monster. Then the Monster 2. Now there’s the Monster X. As revolutionary as it’s predecessors, the new Monster X Electronic Speed Controller (ESC) takes Castle’s legendary “monster” performance to a whole new level. The waterproof* Monster X is capable of 2S LiPo up to a maximum of 6S LiPo and is the legendary “power up” for 1/8th scale buggies, truggies and on-road vehicles as well as 1/10th scale monster trucks and R/C monstrosities weighing up to 15 lbs. Extreme Power • Extreme Control • Extreme Fun! The new Monster X provides even more extreme performance than the Monster 2. Most notable is the addition of a new, programmable Auxiliary Wire that allows users to make “on-the-go” adjustments to several settings, such as torque control and max throttle. The new Auxiliary Wire allows users to fine-tune the performance of their Monster X ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once the user has programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. The Monster X also features updated Audible Alerts that will notify drivers of possible issues with their calibrations and error conditions to help diagnose problems in the field. Sensored Motor Capable The new Monster X can also be configured to run sensored brushless motors with the purchase of an optional Sensor Harness from Castle Creations. This sensored-motor capability opens up a whole new segment of R/C enthusiasts who will now get to experience (or see the rooster tails) from a Castle Monster X-equipped racer, rock racer or rock crawler. One of our Monster X Beta testers summed up his experience, saying “Another race weekend in the books. Once again, in sensored mode, the ESC (Monster X) performed flawlessly. Great power and smooth transition from sensored to non-sensored.” Extreme Power The new Monster X is capable of running from 2S to a maximum of 6S LiPo power, but now features an improved heavy-duty adjustable Battery Eliminator Circuit (BEC) to provide plenty of power for today’s power hungry servos. The Monster X BEC voltage is adjustable from 5.5V, 6.0V, 7.5V and 8.0V with an 8 AMP peak. The Monster X also comes standard with a highly efficient, 30mm ESC cooling fan. Monster X Data Logging Also new to the Monster X is the ability to capture and record performance data from your last couple of runs, commonly referred to as data logging. This data can be downloaded via the upcoming Castle Quick Connect Duo (sold separately) that allows the user access to both wires into the single Castle Link connection. The user can then analyze this data and make adjustments to the ESC to maximize both performance and battery life. Telemetry Ready (Compatibility Coming Soon for Futaba T4PX Transmitters!) The new Monster X is telemetry ready, which means owners of Futaba T4PX Transmitters will be able to purchase the Castle Creations S.BUS Telemetry Link when it is released. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection, can increase your “tuning awareness” and in turn, let you have more time doing what you love to do – burn rubber and throw dirt! Throttle Input: Flexible input - Digital S.BUS Channels (1-16) or an External non-S.BUS Input Available Telemetry Data (Monster X):      Battery Voltage Battery Current Motor Power Output RPM BEC Voltage Battery Ripple ESC Temperature Compatible Transmitters:      Futaba T4PX & T7PX Tech Notes: Link Live mode must be enabled through Castle Link USB adapter to allow communication with the Telemetry Link. Extreme ESC and Extreme Combos The Mamba Monster X is available as an ESC only or in combination with Castle’s award-winning 15XX Series brushless motors; the 1515 2200KV or the 1512 2650KV motor. Castle Link Adjustable Settings for te Monster X include: Brake/Reverse Type LiPo Cutoff Voltage Brake Amount Drag Brake Motor Type Additional Castle Link Benefits include: Access all firmware updates, included added feature sets released from Castle Engineering FREE of charge Intuitive Demo Mode Ability to save basic to complex setup profiles for later use Award Winning Combination The new Mamba Monster X is available as an ESC only or in combination one of two different Castle motors; the 1515 2200KV or the 1512 2650KV brushless motor.Specifications: Input Voltage Range: MIN: 2S LiPo; MAX: 6S LiPo (25.2V) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. (See Product Use Statements)* Brake: Proportional Reversible: Yes - with lockout On/Off Switch: Yes ESC Cooling Fan: Yes, factory equipped (30 mm), fully removable and replaceable. (See Product Use Statements)** Size: 53 x 49 mm Weight (w/wires): 111.1 g Items Needed for Operation: Battery Connector required, Castle 6.5mm Connectors are recommended Product Use Statements: *Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run. Tech Notes: Not all LiPos are created equal, and surge ratings should never be used to determine a pack’s suitability for a brushless application. Use the CONTINUOUS C rating only. Mamba Monster setups frequently hit 100+ amps in peaks. We strongly suggest using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C (or high quality 25C batteries such as Traxxas® Power Cells®). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Customer comment: “I am running a Thunder Tiger MT4 G3 1/8th scale monster truck. It had the stock ready-to-run brushless system on it. It was a Ripper (re-branded Leopard) 2,000 Kv 4 pole motor. It was okay, but had multiple electrical problems. The 4mm “squirrel cage” connectors kept melting, until I put on high quality Castle Creations connectors. The motor itself had the non-flexible type motor leads. I fried the motor and speed controller. Enter the Mamba Monster X promotion in my email inbox. Too good an opportunity to pass up. I ordered it on a Friday 7/24, it arrived on a Monday 7/27. I can finally do this monster truck justice. The Mamba Monster X speed controller dropped right in. The 8A peak BEC, adjustable up to 8V is a really nice feature. To take advantage of this, I installed a Hi-Tech HS-7954SH servo, which is 403 oz-in at 7.4V. The data logging feature is a really nice touch. I confirmed the BEC voltage stayed rock solid at 7.4V throughout my entire first run session, after looking at the graph. It really held the load of the high power servo. The aux channel is really nice feature, too, to control various parameters. That, plus this system is waterproof, is icing on the cake. The Castle 1515 2,200 Kv motor is proven performer. It is, after all, WINNER OF RC CAR ACTION'S READERS' CHOICE AWARD FOR 3 CONSECUTIVE YEARS. The 6.5mm bullet connectors are nice. With this combo on 4S, in my 11 lbs truck, I can pull wheelies at any speed. At one point, I data logged a 5.4 hp run. That is simply phenomenal. Armed with just a picture of that, I am convincing my friends to jump into the RC world. You have a real winner on your hand, Castle Creations!” – Stephen Englehart (Thunder Tiger MT4 G3 monster truck, 11 pinion, 50 spur) Customer comment: “This is the BEST controller Castle has ever put out. It was able to drive my hi torque servo with the built in BEC. Tons of new features for data logging and setting the controller up. This will definitely be my goto controller from now on!” – Brad Remenak (Axial Yeti XL Kit pinion - 15T, spur - 68T stock setup - will be switching to 17T pinion soon) Customer comment: “This ESC has been a blast to learn. The controller will actually communicate with you through audible tones to let you know what exactly is going on. It takes the guess work out. The data logging feature is another one of my favorites. The amount of info this controller can track is crazy and you can customize what info to track depending on what is most important to you. I have always been a fan of Castle products and would highly recommend this controller to all R/C enthusiasts” – Henry Urbina (Traxxas Summit 62 tooth spur - 18 tooth pinion) *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.

2.595,-

2.995,-

KJØP
-13%
Hovedbilde Ezrun Max 5 Hobbywing ESC Hovedbilde Ezrun Max 5 Hobbywing ESC
Ezrun Max 5 Hobbywing ESC
Art.nr: 30104000
Copied
Hobbywing EzRun Max5 er vannbestandig og leveres med ferdig påloddet motorkontakter (6,5mm female gullkontakt) og uten batterikontakt. Regulatoren er kompatibel med 3-8s LiPo beregnet for bruk på 1/5 biler som Traxxas X-Maxx, HPI Baja, Desert Buggy XL og Losi 5IVE. På 8S er det anbefalt med motorer under 1000KV.   Høy kvalitet MAX5 består kun av høy-kvalitetskomponenter og er designet for bruk til hard-core bashing biler.   Fleksibel og allsidig Her har brukeren muligheten til å justere ESCens parametere for å tilpasse til egen kjørestil. Ekstrem akselerasjonsmuligheter Stabil Output Asfalt og terreng   All slags vær! Regulatoren er vanntett og støvtett og passer til bruk i all slags vær.   High Voltage BEC BECen er innebygd og har en output current på 25Amp og justerbar output voltage på 6-7.4V.   Elektronisk bryter Med regulatoren følger det med en elektronisk bryter som skal holde til å kunne slå av og på bilen over 50.000 ganger! Bryteren er plassert i et vann og støvtett cover.   Oppdateringer Alle oppdateringene som gjøres på MAX5 kan gjøres via USB-Link, LCD Program Boxen og en PC. Alle oppdateringene er gratis.   Vedlikehold Med unntak av kjøleviften så er ESCen så og si vedlikeholdsfri, vi anbefaler uansett å fjerne støv, steiner og vann fra bil for å unngå slitasje på drivverk.   Anti-Spark MAX5 har innebygget anti-spark koblinger som hindrer gnist ved tilkobling av batterier med høy spenning.   Size Matters! MAX5 er som tidligere nevnt designet for bruk i 1/5 skala biler. Noen eksempler på biler som vil passe MAX5 er: HPI Baja Buggy Losi 5IVE-T Elektrisk konvertering Desert Buggy XL Traxxas X-Maxx   Spesifikajoner Innspenning: 3-8S LiPo Dimensjoner: 93.4 x 58.1 x 47.8mm Vifte: 45 x 45 x 10mm (5-7.4V) BEC: Ja Programmering: Støtter LED og LCD Program Box, SET Button programmering, WiFI-Module, OTA-Programmer og Programeringsport OBS! Dette er en ekstremt kraftig ESC det er derfor viktig å fjern pinion gir ved nyinstallering og gjør kalibrering og programmering før montering av pinion igjen. Det anbefales også alltid å ha hjulene i luften under oppstart. High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX5/MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX5/MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. MAX5 Applications: The EZRUN MAX 5 provides the ultimate power upgrade solution for many popular 1/5th scale vehicles like HPI Baja buggy, Losi 5IVE-T Nitro-to-Electric truck, and Desert Buggy XL Nitro-to-Electric buggy. It’s also suitable for various other brand of 1/5th scale on-road cars, truggies, SCTs and buggies. Specifications:   Model EZRUN-MAX6 EZRUN-MAX5 Cont./Peak Current 160A/1050A 200A/1300A Motor Type Sensored / Sensorless Brushless Motor (only in sensorless mode) Applications 1/6th Touring Car, Buggy, Truggy and Truck 1/5th Touring Car, Buggy, Truggy and Truck Motor Limit With 6S LiPo/18S NiMH: KV ≤1500 (5892 size motor) With 8S LiPo/24S NiMH: KV ≤1200 (5892 size motor) With 8S LiPo/24S NiMH: KV ≤ 1000 (58110 size motor) LiPo/NiMH Cells 9-24S NiMH, 3-8S LiPo BEC Output 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC) Cooling Fan Powered by the stable BEC voltage of 6V/7.2V Connectors Input End: No, Output End: Female 6.5mm Gold Connectors (pr e-soldered onto the PCB of the speed contr oller). Size/Weight 70(L)x56(W)x46.5(H)/240g 93.35 (L)x 58.12 (W)x 47.81 (H)/342g Programming Port FAN /PRG Port   High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX5 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.   Great Flexibility & Versatility With incredible acceleration capabilities and a rock-solid, stable output, the MAX5 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability.   Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX5 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.   High Voltage Built-in BEC The MAX5 has adopted the world’s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by large scale vehicles.   Advanced and Secure Electronic Switch The MAX5 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.   Regular Firmware Updates Free of Charge You can upgrade the MAX5 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.   Maintenance Free The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.   Built-in Anti-Spark System The MAX5 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).   Wide Range of Applications MAX5 Applications: The EZRUN MAX 5 provides the ultimate power upgrade solution for many popular 1/5th scale vehicles like HPI Baja buggy, Losi 5IVE-T Nitro-to-Electric truck, and Desert Buggy XL Nitro-to-Electric buggy. It’s also suitable for various other brand of 1/5th scale on-road cars, truggies, SCTs and buggies Specifications Scale:1/5th Brushed/Brushless: BL Sensored/Sensorless: SL Waterproof: WP Cont./Peak Current: 200A/1300A Input Voltage: 3-8S LiPo/9-24 Cells NiMH BEC Output: Switch Mode:6V/7.4V,6A Wires & Connectors Input Wires: Red-8AWG-200mm*1/Black-8AWG-200mm*1 Output Wires: Black-10AWG-200mm*3 Input Connectors: No Output Connectors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB) (Note: All the wire length above is the original length not the length you see from the outside.) Fan Size: 45.0x45.0x10.0mm Voltage Range: 5-7.4V Powered by: Powered by BEC ESC Programing via SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port Firmware Firmware Upgrade: Supported Size & Weight Size: 93.4x58.1x47.8mm Weight: 342g Applications Motors: SL BL Motors/SD BL Motors(only in SL mode) Vehicles: 1/5th Touring Car/Buggy/Truck KV Rating/T Count: 8S LiPo: KV ≤ 1000 (58110 Size Motors)

2.385,-

2.585,-

KJØP
-8%
Hovedbilde Ezrun Max 6 Hobbywing ESC Hovedbilde Ezrun Max 6 Hobbywing ESC
Ezrun Max 6 Hobbywing ESC
Art.nr: 30105000
Copied
High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility With incredible acceleration capabilities and a rock-solid, stable output, the MAX6 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.   High Voltage Built-in BEC The MAX6 has adopted the world’s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by large scale vehicles.   Advanced and Secure Electronic Switch The MAX6 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.   Regular Firmware Updates Free of Charge You can upgrade the MAX6 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.   Maintenance Free The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.   Built-in Anti-Spark System The MAX6 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).   Wide Range of Applications MAX6 Applications: This ESC is applicable to various 1/6th & 1/7th scale vehicles like the Traxxas XO-1, and also suitable to various 1/8th scale heavy vehicles like the CEN GST-E. It's the ideal option for high-end aggressively powered builds. Specifications Scale: 1/6th 1/7th Brushed/Brushless: BL Sensored/Sensorless: SL Waterproof: WP Cont./Peak Current: 160A/1050A Input: 3-8S LiPo/9-24 Cells NiMH BEC Output: Switch Mode:6V/7.4V,6A   Wires & Connectors Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1 Output Wires: Black-10AWG-200mm*3 Input Connectors: No Output Connectors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB)   Fan Size: 35.0x35.0x10.0mm Voltage Range: 5-7.4V Powered by: Powered by BEC   ESC Programing via SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port   Firmware Firmware Upgrade: Supported   Size & Weight Size: 70.0x56.0x46.5mm Weight: 240g   Applications Motors: SL BL Motors/SD BL Motors(only in SL mode) Vehicles: 1/6th 1/7th Touring Car/Buggy/Truck KV Rating/T Count: 6S LiPo: KV≤1500/8S LiPo: KV≤1200(5892 Size Motors) Click here to look at the FAQ and Software Updates for EzRun MAX6 This is an extremely powerful brushless motor system. For your safety and the safety of those around you, we strongly recommend removing the pinion gear before performing calibration and programming functions with this system, and keeping wheels in the air when you turn on the ESC.  

1.795,-

2.195,-

KJØP
-18%
Hovedbilde Hobbywing 30102603 EzRun MAX10 G2 140A ESC 1/10 2-4S ... Hovedbilde Hobbywing 30102603 EzRun MAX10 G2 140A ESC 1/10 2-4S ...
Hobbywing 30102603 EzRun MAX10 G2 140A ESC 1/10 2-4S ...
Art.nr: HW30102603
Copied
Hobbywing Ez-Run Max10 G2 140A ESC (for EzRun 3652SD/3665SD G3 Motors) Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Smart technology increases heat dissipation effectiveness The addition of the patented frameless fan allows a large flow of air outlet on the side of the fan to blow the heat away from the integrated case. *Patented frameless fan New technology increases heat dissipation effectiveness The addition of the patented frameless fan allows a large flow of air outlet on the side of the fan to blow the heat away from the integrated case. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 140/880A Input Voltage: 2-4S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 30x30x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks KV Rating 3S LiPo: ≤4000kV 3665 size motor KV Rating 4S LiPo: ≤2600kV 4268 size motor

1.295,-

1.495,-

KJØP
-13%
Hovedbilde Hobbywing 30102604 EzRun Max10 G2 80A Brushless ESC ... Hovedbilde Hobbywing 30102604 EzRun Max10 G2 80A Brushless ESC ...
Hobbywing 30102604 EzRun Max10 G2 80A Brushless ESC ...
Art.nr: HW30102604
Copied
Hobbywing 30102604 EzRun Max10 G2 80A Brushless ESC 2-3S 80A 2-3S kompatibel Designet for 1/10 biler Hobbywing EzRun Max10 G2 er vannbestandig og leveres med ferdig påloddet motorkontakter (4mm female gullkontakt) og XT60 batterikontakt. Regulatoren er kompatibel med 2-3s LiPo. Motorvalg 2S LiPo: 3652-opp til 6000KV 3S LiPo: 3652-opp til 4200KV   Spesifikasjoner Størrelse 53 x 39.5 x 37,2mm Vekt 120g Batterikontakt XT60 Type Børsteløs & Sensor/Sensorløs Innspenning 2-3S LiPo BEC 6V/7.4V (kontinuerlig spenning 5A)   Hobbywing Ez-Run Max10 G2 80A ESC (for EzRun 3652SD/3665SD G3 Motors) Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Smart technology increases heat dissipation effectiveness The addition of the patented frameless fan allows a large flow of air outlet on the side of the fan to blow the heat away from the integrated case. *Patented frameless fan New technology increases heat dissipation effectiveness The addition of the patented frameless fan allows a large flow of air outlet on the side of the fan to blow the heat away from the integrated case. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 80/520A Input Voltage: 2-3S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 25x25x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate Applications: 1/10 Vehicles: Buggy & Short Course Tryucks (Light Loads) KV Rating 2S LiPo: ≤6000kV KV Rating 3S LiPo: ≤4200kV 3652 size motor

939,-

999,-

KJØP
-6%
Hovedbilde Hobbywing 30103205 EzRun MAX8 G2S 160A 3-6S Sensored ... Hovedbilde Hobbywing 30103205 EzRun MAX8 G2S 160A 3-6S Sensored ...
Hobbywing 30103205 EzRun MAX8 G2S 160A 3-6S Sensored ...
Art.nr: HW30103205
Copied
Hobbywing HW30103205 - EzRun MAX8 G2S ESC The esc has an innovative waterproof sensor interface,enhancing the overall waterproof and dustproof performance. It is easy to deal with the harsh conditions containing sediment, ice and snow, water accumulation. Built-in ultra-powerful switch mode BEC and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos. Supports turbo timing setting, the timing response is remarkable when used with the matching motor. Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection. The built-in (integrated in the switch) Bluetooth function allows for setting and upgrading the esc by directly connecting to the mobile app, without any additional devices, making it simpler and more convenient Data logging function to view various running data on the HW LINK app Supports the firmware upgrade of the ESC, you can enjoy the latest functions Extreme output, easy to control The ESC has power, yet smooth and linear throttle response. This balance of power and control allows drivers to drive their vehicles at the limit comfortably. Optimized hardware, increases in stability and reliability Based on the MAX8 G2 ESC, the brand new G2S ESC is equipped with optimized hardware design application such as intelligent freewheeling technology. The stability and reliability of the ESC has been further improved. Optimized hardware design Intelligent freewheeling technology Built-in Bluetooth, directly connected to the mobile APP The ESC has a built-in Bluetooth module. It allows you to connect to the mobile APP directly without plugging any device. It is simple and convenient to perform parameter settings, data reading, firmware upgrades other operations. Note: The data includes throttle amount, voltage, current, temperature, speed, etc. Built-in data logging function, ease of obtaining power operating status The ESC has a built in data recording module. Store up to 10 minutes of your most recent run. Using the HW Link V2 App, you can view the data saved to the ESC. In addition, the module allows you to view Real Time Data from the ESC for bench top testing and viewing of the data outputs. Note: Due to transmission distance of bluetooth, the effective distance is only about 5m! Intelligent fan start and stop function The ESC fan does not run when the ESC temperature is low.The fan automatically turns on when the ESC temperature reaches the preset value. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range. Efficient cooling system A frameless fan with patented technology is used. The large flow of air from the side of the fan effectively blows the heat away from the integrated housing radiator to ensure that the ESC is always in the optimal operating temperature. High level of protection Excellent waterproof and dust-proof performance (IP67) Cope with harsh environments, various climate conditions all-weather operation capabilities 1/8th power system turbo timing technology Turbo timing that is adjustable up to 32 degrees. Using turbo allows motor RPM to be increased through advanced ESC electronic timing. The maximum speed can be increased by approximately 25% (EzRun 4268/4278SD G2 motors) Capacitor overheating protection The Capacitor protection prevents damage to the power caps from overheating from overloads or extreme conditions. This protects the ESC from damage. Buil-in Super BEC A maximum output current of up to 15A The output voltage can be switched in three levels of 6V, 7.4V & 8.4V The built in super BEC allows racers to use high power, high voltage servos. Waterproof Sensor Harness The proven Hobbywing waterproof sensor harness provides an element proof solution for sensor based systems. Using a Hobbywing Adaptor (optional) normal/standard sensor motors can be used as well. Note: Supports normal adaptor sensored motors, it requires an additional adapter wires for other motors. Specs: Brushless, Sensored, Waterproof 1/8 ESC Cont./Peak Current: 160A/1050A Input Voltage: 3-6S Lipo BEC Output: 6V / 7.4V / 8.4V adjustable, continuous current 6A (Switch-mode) Input Wires: 10AWG-150mm Output Wires: No Input Connectors: XT90 Output Connectors: 6.5mm Bullet Connectors (Female) Fan Size: 30x30x10mm Fan Voltage Range: 6V/7.4V/8.4V Fan Powered by: BEC Size: 60x48x40.5mm Weight: 192g Firmware Upgrade: Supported ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Not Supported LCD G2 Program Box: Not Supported LCD PRO: Not Supported OTA Programmer: Not Supported Program Port: Built-in Bluetooth Data Recording: Extreme value: Supported Real-time Data: Supported Historical data (Graph): Supported Applications: Motors: Sensored brushless motors / Sensorless brushless motors Vehicles: 1/8th On-road, Short course trucks & Monster trucks KV Rating/T Count: With 4S Lipo: KV≤3000; With 6S Lipo: KV≤2400 4278 size motor

1.695,-

1.795,-

KJØP
-6%
Hovedbilde Hobbywing 30104200 EzRun MAX5 HV G2 250A 6-12S ... Hovedbilde Hobbywing 30104200 EzRun MAX5 HV G2 250A 6-12S ...
Hobbywing 30104200 EzRun MAX5 HV G2 250A 6-12S ...
Art.nr: HW30104200
Copied
EZRUN MAX5 HV G2 - 6-12S LiPo Sensored Brushless ESC 12S HV ESC, enhanced performance The Max5 HV G2 ESC is designed to work in full-sensored mode at all times when it is paired with HOBBYWING EZRUN 56118 G2. The ESC supports up to 12s LiPo with a maximum output current of up to 250A. The strong explosive, stable output power, together with an excellent low-speed linearity, ensures the ESC meets various application requirements such as; violent start-up, straight-line high-speed, flying slopes, low-speed walking, etc. Intelligent freewheeling technology - Strong drive & Low temperatures The innovative intelligent freewheeling technology effectively reduces heat generation and enables the ESC to have higher driving efficiency. With the addition of super-high power design, operating temperature is drastically lowered (approximately 30 degrees) to improve overall stability and reliability of the ESC. Note: Under heavy load conditions, the temperature of MAX5 HV G2 is only slightly higher than that of MAX4 HV. High protection level, all-weather operation The IP-67 waterproof rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Capacitor upgrade - More secure protection Compared with the previous generation (MAX5 ESC), the total capacity of the capacitor has increased by 45% (1260uF). The super large capacity ensures that 5th scale models do not need external capacitors. In addition, the built-in capacitor thermal protection function of the ESC is always in safe operating state. Powerful BEC The ESC has a built-in super BEC with a maximum output current of up to 25A. The output voltages are switchable between 6V/7.4V/8.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Built-in anti-spark design - Multi-directional protection The ESC has a built-in anti-spark circuit to protect the battery plug from damaging upon using a higher voltage battery(6-12S), and avoids any injuries. Perfect combination with EZRUN 56118 SD G2 motor Achieve the perfect compatibility when used together with EzRun 56118 SD G2 motors. Avoid damaging the motor from overheating with the software protection function. Note: Non-Hobbywing EzRun 56118 SD G2 motors cannot realize motor overheat protection Record and store data in real time to keep track of the running status Connect the ESC to the OTA Bluetooth module, and through the mobile phone APP, you are able to view real-time data and operating status such as; throttle, voltage, current, temperature, speed, etc. Note: Due to the Bluetooth transmission distance, the effective distance is only about 5m! New sensor wire interface - Upgraded waterproof protection The new sensor wire interface enhances the ESC protection level and solves waterproof problems faced by traditional interfaces. Please Note: This ESC supports sensored motors with common interfaces. Sensor wire needs to be purchased separately! Specs: Type: 1/5, Brushless, Sensored, WP ESC Cont./Peak Current: 250A/1600A Input Voltage: 6-12S LiPo BEC Output: 6V/7.4V/8.4V adjustable, continuous current 8A (Switch-mode) Input Wires: 8AWG-200mm Input Connectors: No Input Connectors: 8.0mm Bullet Connectors (Female) Firmware Upgrade: Supported Size: 94.5x59.4x50.9mm Weight: 428.5g (Included input wires) Motors: 56118 size motors Vehicles: 1/5 Truck & Buggy. Examples: Losi DBXL-E, Losi 5T Electrified, ARRMA Kraton 8S & ARRMA Outcast ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Supported OTA Programmer: Supported Program Port: Independent programming port

2.925,-

3.195,-

KJØP
-8%
Hovedbilde Hobbywing 30105100 EzRun Max6 G2 200A Brushless ESC ... Hovedbilde Hobbywing 30105100 EzRun Max6 G2 200A Brushless ESC ...
Hobbywing 30105100 EzRun Max6 G2 200A Brushless ESC ...
Art.nr: HW30105100
Copied
200A 3-8S Designet for 1/6 & 1/7 biler Hobbywing EzRun Max6 G2 er vannbestandig og leveres med ferdig påloddet motorkontakter (6,5mm female gullkontakt), men uten batterikontakt. Regulatoren er kompatibel med 3-8s LiPo. Designet for bruk på 1/6 & 1/7 biler. Dette produktet leveres med en fastmontert sensorkabel og vil ikke funke med andre Hobbywing-enheter som ikke bruker det samme systemet.Spesifikasjoner Størrelse 70 x 56 x 45.5mm Størrelse vifte 35 x 35 x 10mm Vekt 245g Batterikontakt Leveres uten Type Børsteløs & Sensor/Sensorløs Innspenning 3-8S LiPo BEC 6V/7.4V/8.4V @8A

1.995,-

2.095,-

KJØP
-5%
Hovedbilde Hobbywing 30107300 QuicRun WP 10BL60 G2 Hovedbilde Hobbywing 30107300 QuicRun WP 10BL60 G2
Hobbywing 30107300 QuicRun WP 10BL60 G2
Art.nr: HW30107300
Copied
Produktinformasjon 1/10 Skala Stock Børsteløs HobbywingQuicRun WP 10BL60 G2. Passer til 1/10 Skala Biler Intelligent Freewheeling-teknologi reduserer effektivt varmeutvikling. Denne teknologien gjør det mulig for ESC-en (Electronic Speed Controller) å oppnå høyere kjøreeffektivitet ved lavere driftstemperatur. Dette forbedrer stabiliteten og påliteligheten til ESC-en ytterligere.   Spesifikasjoner Skala Type 1/10 Skala Type Børsteløs / Sensorløs Vanntett Ja Innspenning 2-3S Lipo BEC Out Switch Mode 6V @3A Kabler 14AWG-150mm Kontakter Inkludert Størrelse 30 x 30 x10mm Vekt m/kabler 82.6g   Hobbywing HW30107300 - QuicRun WP 10BL60 G2 ESC Intelligent freewheeling technology effectively reduces heat generation The intelligent freewheeling technology enables the ESC to be able to achieve higher driving efficiency at a lower operating temperature. It further improves on the stability and reliability of the ESC. Small and compact The new QuicRun WP 10BL60 ESC is more compact than its predecessor: 2.5mm shorter 1.5mm narrower Efficient cooling system The mesh design of the heat sink is used for efficient cooling of the ESC. Each of the phases adapt a copper thermal bar for better cooling. The heat sink designed with the fan ensures the ESC is always in the best operating temperatures. Capacitor overheating protection The capacitor overheating protection function will effectively prevent exploding capacitors due to overload usage. It prevents users from completely damaging the ESC. All-weather operation capability The ESC's protection level reaches IP67. Able to easily cope with various competition environments such as rain, dust, and sand with its excellent waterproof and dust-proof protection. Note: The above-mentioned IP67 protection level is splash-proof, water-resistant, and dust-proof under normal use. It is not permanently effective, and the protective performance may degrade due to daily wear and aging. Do not submerge in water for a long time, otherwise the product may be damaged. A vast variety of programming methods It supports three programming methods: Multi-function LCD programming box PRO, LED programming box, and SET key, making it easy for users to choose their favorite programming method for parameter adjustment. Great value for money Designed specifically for entry-level users. Simple to use high quality product. Easy to install and go! Specs: Type: 1/10, brushless, sensorless, waterproof ESC Cont./Peak Current: 60A/360A Input Voltage: 2-3S Lipo BEC Output: Switch Mode 6V @3A Input Wires: 14AWG-150mm Output Wires: 14AWG-60mm Input Connectors: No Output Connectors: 4.0MM Gold (female) Fan Size: 30x30x10mm Fan Voltage Range: 6V Fan Powered by: BEC Firmware Upgrade: Not Supported Size: 46x36.5x34.3mm Weight: 82.6g (Including wires & connectors) ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD G2 Program Box: Supported LCD PRO: Supported OTA Programmer: Not Supported Program Port: Shared with fan port Applications: Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 On-road, Buggy, Short course truck KV Rating/T Count: 2S LiPo: KV≤6000；3S LiPo: KV≤3500（3652/3660 size motor)

595,-

KJØP
Hovedbilde Hobbywing 30109003 QuicRun 8BL150 G2 Brushless ESC ...
Hobbywing 30109003 QuicRun 8BL150 G2 Brushless ESC ...
Art.nr: HW30109003
Copied
150A 3-6S Effektiv kjøling BEC IP67 QuicRun 8BL150 G2, 150A børsteløs regulator. Passer utmerket til 1/8 skala monster trucks. Kompatibel med 3-6s LiPo og leveres uten batterikontakt. Denne regulatoren har også en innebygget BEC der du kan velge 6V eller 7.4V. Regulatoren programmeres via LED Program Box via programmeringsport.Passer i bruk sammen med QuicRun motorer. ESCen kommer uten motorkontakter (6,5mm kreves).   Spesifikasjoner Dimensjoner (LxBxH) 60x48x40.4mm Vekt 169g LiPo 3-6S BEC 6V / 7.4V - 6A Max anbefalt motor 4S KV3000 4274 Max anbefalt motor 6S KV2400 4274

1.095,-

KJØP
Hovedbilde Hobbywing 30112609 XeRun XR10 Pro HD 120A V4.1 ESC 1s Hovedbilde Hobbywing 30112609 XeRun XR10 Pro HD 120A V4.1 ESC 1s
Hobbywing 30112609 XeRun XR10 Pro HD 120A V4.1 ESC 1s
Art.nr: HW30112609
Copied
Hobbywing XeRun XR10 Pro HD 120A V4.1 ESC 1s   Ufattelig liten og lett 120A børsteløs regulator fra Hobbywing, kun 46,7g. Beregnet for bruk med 1s LiPo eller 3-4celler NiMh og sensor baserte motorer. Leveres med ledninger men uten kontakter. Kan programmeres med LCD programmeringsboks eller via WiFi modulen (må kjøpes separat). 6V 3A BEC. Størrelse 37,5 x 31 x 15,9mm Vekt 46,7g Product details in english Specification Application 1/10 - 1/12 Brushless sensored system Cont. 120A Peak Current 830A Input 1S LiPo / 3-4 Cells NiMH BEC output Switch Mode:6V/3A Programmable Yes Firmware update Yes WiFi Module Enabled Dim. 37.5x31x15.9mm Weight 46,7g   Word`s Champion`s choice, ROAR APPROVED Redesigned new architecture platform 40% smaller in volume* (*6mm shorter, 6mm smaller in width) 24% lighter in weight (12g lighter than the previous generation) Premium MOSFETs (Toshiba MOSFETs) Super BEC. Internal BEC features booster circuitry can output the current/voltage of up to 6A/6V and power various servos without connecting any extra receiver battery. Built-in electronic switch (with a lifespan of over 50000 on/off cycles, dust-proof and shock-resistant design) Built-in capacitor module saves space and weight making the wiring simple and neat. PWM Frequency tuning - guarantees precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class). Maximum Cooling performance - Separate Programming/Fan Port The separate PRG/FAN port on the ESC can power an external fan to maximize cooling performance or connect the ESC to an LCD program box or WiFi module for ESC programming. Programming through WiFi Works with an LCD program box or WiFi Express Module (purchase separately) Innovative Data-logging function - This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows users to check those data via an LCD program box or WiFi module after each use

2.495,-

2.695,-

KJØP
-7%
Viser 1 til 25 (av 77 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png