This is the Hitec HS-5245 Metal Gear Ball Bearing
Digital Super Torque Mini Servo with the
Universal Futaba J, Hitec S, JR and Airtronics Z Connector.
Suitable for small medium and sport planes, gliders,
.30 size helicopters, and cars.
FEATURES
Dual ball bearings.
Digital and MOSFET amp programmable
Indirect drive potentiometer for long life.
Narrow dead band width and high standing torque.
INCLUDES
One Hitec HS-5245 Metal Gear Ball Bearing Digital Super Torque Mini
Servo with the Universal with, four rubber grommets, four eyelets,
one star shaped, one arm, and two arm straight nylon servo horns,
one aluminum servo horn.
REQUIREMENTS
Installing on model, attaching linkages, and connecting to receiver.
SPECIFICATIONS
Wire color codes: Black-Ground, Red-Power, Yellow-Signal
Operating speed: 0.15 sec @ 60° at 4.8V
Torque: 61 oz-in (4.4 kg-cm)
Weight: 1.12oz (32g)
Length: 1.27" (32.4mm)
Width: 0.66" (16.8mm)
Height: 1.21" (30.8mm)
Wire length: 12" (305mm) approximate
COMMENTS
In order to program the Fail-Safe on this servo, modeler will need to
purchase the Hitec Field Programmer.
Product Description
With a custom programmable digital circuit and our strong metal and M/P gear train technology, the HS-5245MG is ideal for applications that call for a small, lightweight, fast and high torque servo.
Features
- High Speed and High Torque in a Mini Package
- Durable Metal Gears
- Dual Ball Bearings
- Standard Programmable Digital Circuit for Greater Holding Power
- Fast, High Torque
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Data Save / Load
- Program Reset
Accessories
- Metal Gear Set | Link |
- Metal / Plastic 1st Gear Set | Link |
- Plastic Case Set | Link |
- Applicable Horns
HS-5245MG Servo Specifications
Performance Specifications |
Operating Voltage Range (Volts DC) |
4.8V ~ 6.0V |
Speed (Second @ 60°) |
0.15 ~ 0.12 |
Maximum Torque Range oz. / in. |
61 ~ 76 |
Maximum Torque Range kg. / cm. |
4.4 ~ 5.5 |
Current Draw at Idle |
3 mA |
No Load Operating Current Draw |
300 mA |
Stall Current Draw |
1,200 mA |
Dead Band Width |
4 µs |
Physical Specifications |
Dimensions (Inches) |
1.27 x 0.66 x 1.21 |
Dimensions (Metric) |
32.4 x 16.8 x 30.8 |
Weight (Ounces) |
1.12 |
Weight (Gram) |
32.0 |
Circuit Type |
G1 Programable Digital |
Motor Type |
3 Pole Metal Brush Ferrite |
Gear Material |
Metal |
Bearing Type |
Dual Ball Bearing |
Output Shaft (type / Ømm) |
Standard 24 |
Case Material |
Plastic |
Dust / Water Resistance |
N / A |
Connector Gauge (AWG) / Strand Count |
25 / 40 |